2021-12227. Airworthiness Directives; Airbus Helicopters Deutschland GmbH (AHD) Helicopters

AGENCY:

Federal Aviation Administration (FAA), DOT.

ACTION:

Final rule.

SUMMARY:

The FAA is adopting a new airworthiness directive (AD) for Airbus Helicopters Deutschland GmbH (AHD) Model EC135P1, EC135P2, EC135P2+, EC135P3, EC135T1, EC135T2, EC135T2+, and EC135T3 helicopters. This AD was prompted by a report of increased control force in the collective axis. This AD requires a one-time visual inspection of the main rotor actuator (MRA), as specified in a European Aviation Safety Agency (now European Union Aviation Safety Agency) (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.

DATES:

This AD is effective July 16, 2021.

The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of July 16, 2021.

ADDRESSES:

For material incorporated by reference (IBR) in this AD, contact the EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; telephone [phone]; email [e-mail]; internet www.easa.europa.eu. You may find this material on the EASA website at https://ad.easa.europa.eu. You may view this material at the FAA, Office of the Regional Counsel, Southwest Region, 10101 Hillwood Pkwy., Room 6N-321, Fort Worth, TX 76177. For information on the availability of this material at the FAA, call [phone]. It is also available in the AD docket on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA-2021-0199.

Examining the AD Docket

You may examine the AD docket on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA-2021-0199; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, any comments received, and other information. The address for Docket Operations is U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590.

FOR FURTHER INFORMATION CONTACT:

Katherine Venegas, Aviation Safety Engineer, Los Angeles ACO Branch, FAA, 3960 Paramount Blvd., Lakewood, California 90712; telephone [phone]; email [e-mail].

SUPPLEMENTARY INFORMATION:

Background

EASA, which is the Technical Agent for the Member States of the European Union, has issued EASA AD 2018-0284, dated December 20, 2018 (EASA AD 2018-0284), to correct an unsafe condition for Airbus Helicopters Deutschland GmbH (AHD) Model EC135 P1, EC135 P2, EC135 P2+, EC135 P3, EC135 T1, EC135 T2, EC135 T2+, EC135 T3, EC635 P2+, EC635 P3, EC635 T1, EC635 T2+, and EC635 T3 helicopters. Model EC635 P2+, EC635 P3, EC635 T1, and EC635 T3 helicopters are not certificated by the FAA and are not included on the U.S. type certificate data sheet; this AD therefore does not include those helicopters in the applicability.

The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to Model EC135P1, EC135P2, EC135P2+, EC135P3, EC135T1, EC135T2, EC135T2+, and EC135T3 helicopters. The NPRM published in the Federal Register on March 30, 2021 (86 FR 16550). The NPRM was prompted by a report of increased control force in the collective axis on an AHD Model EC135 helicopter. Subsequent inspections determined that a nut on a piston of the MRA had cracked and separated from the piston rod. The NPRM proposed to require a one-time visual inspection of the MRA, as specified in an EASA AD.

The FAA is issuing this AD to prevent failure of the MRA and subsequent loss of control of the helicopter. See EASA AD 2018-0284 for additional background information.

Discussion of Final Airworthiness Directive

Comments

The FAA gave the public the opportunity to participate in developing this final rule. The FAA received no comments on the NPRM or on the determination of the cost to the public.

Conclusion

The FAA reviewed the relevant data and determined that air safety and the public interest require adopting this final rule as proposed.

Related Service Information Under 1 CFR Part 51

EASA AD 2018-0284 describes procedures for a one-time visual inspection of the MRA and depending on the results, replacing the affected parts.

This material is reasonably available because the interested parties have access to it through their normal course of business or by the means identified in the ADDRESSES section.

Differences Between This AD and the EASA AD

The EASA AD requires contacting Airbus Helicopters or replacing an affected part, whereas this AD requires performing the corrective action in accordance with FAA-approved procedures or removing the affected parts from service instead. Where the EASA AD specifies a compliance time for the inspection in terms of calendar time or flight hours, this AD requires a compliance time in terms of hours time-in-service instead. Where the EASA AD specifies a compliance time of 15 days for reporting the inspection results, this AD requires that the findings be reported within 30 days.

Interim Action

The FAA considers this AD interim action. If final action is later identified, the FAA might consider further rulemaking then.

Costs of Compliance

The FAA estimates that this AD affects 331 helicopters of U.S. Registry. Labor rates are estimated at $85 per work-hour. Based on these numbers, the FAA estimates that operators may incur the following costs in order to comply with this AD.

Inspecting the nuts on the MRA pistons takes about 1 work-hour for an estimated cost of $85 per helicopter and $28,135 for the U.S. fleet. Replacing the MRA takes about 7 work-hours and parts cost $325,081 for an estimated cost of $325,676 per helicopter. Repairing the MRA takes up to about 8 work-hours and parts cost about $110 for an estimated cost of up to $790 per MRA. Reporting information takes about 1 hour for an estimated cost of $85 per helicopter and $28,135 for the U.S. fleet.

Paperwork Reduction Act

A federal agency may not conduct or sponsor, and a person is not required to respond to, nor shall a person be subject to penalty for failure to comply with a collection of information subject to the requirements of the Paperwork Reduction Act unless that collection of information displays a current valid OMB control number. The control number for the collection of information required by this AD is 2120-0056. The paperwork cost associated with this AD has been detailed in the Costs of Compliance section of this document and includes time for reviewing instructions, as well as completing and reviewing the collection of information. Therefore, all reporting associated with this AD is mandatory. Comments concerning the accuracy of this burden and suggestions for reducing the burden should be directed to Information Collection Clearance Officer, Federal Aviation Administration, 10101 Hillwood Pkwy., Fort Worth, TX 76177-1524.

Authority for This Rulemaking

Title 49 of the United States Code specifies the FAA's authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. Subtitle VII: Aviation Programs, describes in more detail the scope of the Agency's authority.

The FAA is issuing this rulemaking under the authority described in Subtitle VII, Part A, Subpart III, Section 44701: General requirements. Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action.

Regulatory Findings

This AD will not have federalism implications under Executive Order 13132. This AD will not have a substantial direct effect on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government.

For the reasons discussed above, I certify that this AD:

(1) Is not a “significant regulatory action” under Executive Order 12866,

(2) Will not affect intrastate aviation in Alaska, and

(3) Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act.

List of Subjects in 14 CFR Part 39

• Air transportation
• Aircraft
• Aviation safety
• Incorporation by reference
• Safety

The Amendment

Accordingly, under the authority delegated to me by the Administrator, the FAA amends 14 CFR part 39 as follows:

PART 39—AIRWORTHINESS DIRECTIVES

1. The authority citation for part 39 continues to read as follows:

Authority: 49 U.S.C. 106(g), 40113, 44701.

§ 39.13

[Amended]

2. The FAA amends § 39.13 by adding the following new airworthiness directive:

2021-11-17 Airbus Helicopters Deutschland GmbH (AHD): Amendment 39-21579; Docket No. FAA-2021-0199; Project Identifier MCAI-2021-00016-R.

(a) Effective Date

This airworthiness directive (AD) is effective July 16, 2021.

(b) Affected Airworthiness Directives (ADs)

None.

(c) Applicability

This AD applies to all Airbus Helicopters Deutschland GmbH (AHD) Model EC135P1, EC135P2, EC135P2+, EC135P3, EC135T1, EC135T2, EC135T2+, and EC135T3 helicopters, certificated in any category.

Note 1 to paragraph (c): Helicopters with an EC135P3H designation are Model EC135P3 helicopters. Helicopters with an EC135T3H designation are Model EC135T3 helicopters.

(d) Subject

Joint Aircraft System Component (JASC) Code: 6710, Main Rotor Control.

(e) Reason

This AD was prompted by a report of increased control force in the collective axis. The FAA is issuing this AD to prevent failure of the main rotor actuator and subsequent loss of control of the helicopter.

(f) Compliance

Comply with this AD within the compliance times specified, unless already done.

(g) Requirements

Except as specified in paragraph (h) of this AD: Comply with all required actions and compliance times specified in, and in accordance with, European Aviation Safety Agency (now European Union Aviation Safety Agency) (EASA) AD 2018-0284, dated December 20, 2018 (EASA AD 2018-0284).

(h) Exceptions to EASA AD 2018-0284

(1) Where EASA AD 2018-0284 refers to its effective date, this AD requires using the effective date of this AD.

(2) Where paragraph (3) of EASA AD 2018-0284 specifies contacting Airbus Helicopters, this AD requires performing the corrective action in accordance with FAA-approved procedures.

(3) Where paragraph (4) of EASA AD 2018-0284 specifies an alternative method to comply with the requirements of paragraph (3) of EASA AD 2018-0284 by replacing an affected part, this AD requires removing the affected part from service as an alternative method.

(4) Where paragraph (1) of EASA AD 2018-0284 specifies a compliance time of “3 months or 50 flight hours, whichever occurs first,” this AD requires a compliance time of within 50 hours time-in-service (TIS) from the effective date of this AD.

(5) Where paragraph (2) of EASA AD 2018-0284 specifies a compliance time of “15 days,” this AD requires using a compliance time of “30 days.”

(6) The “Remarks” section of EASA AD 2018-0284 does not apply to this AD.

(i) Alternative Methods of Compliance (AMOCs)

(1) The Manager, International Validation Branch, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or local Flight Standards District Office, as appropriate. If sending information directly to the manager of the International Validation Branch, send it to the attention of the person identified in paragraph (j) of this AD. Information may be emailed to: [e-mail].

(2) Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the local flight standards district office/certificate holding district office.

(j) Related Information

For more information about this AD, contact Katherine Venegas, Aviation Safety Engineer, Los Angeles ACO Branch, FAA, 3960 Paramount Blvd., Lakewood, California 90712; telephone [phone]; email [e-mail].

(k) Material Incorporated by Reference

(1) The Director of the Federal Register approved the incorporation by reference (IBR) of the service information listed in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.

(2) You must use this service information as applicable to do the actions required by this AD, unless this AD specifies otherwise.

(i) European Aviation Safety Agency (EASA) AD 2018-0284, dated December 20, 2018.

(ii) [Reserved]

(3) For EASA AD 2018-0284, contact the EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; telephone [phone]; email [e-mail]; Internet www.easa.europa.eu. You may find this EASA AD on the EASA website at https://ad.easa.europa.eu.

(4) You may view this service information at the FAA, Office of the Regional Counsel, Southwest Region, 10101 Hillwood Pkwy., Room 6N-321, Fort Worth, TX 76177. For information on the availability of this material at the FAA, call [phone]. This material may be found in the AD docket on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA-2021-0199.

(5) You may view this material that is incorporated by reference at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, email [e-mail], or go to https://www.archives.gov/​federal-register/​cfr/​ibr-locations.html.

Issued on May 20, 2021.

Gaetano A. Sciortino,

Deputy Director for Strategic Initiatives, Compliance & Airworthiness Division, Aircraft Certification Service.