 |
Code of Federal Regulations (Last Updated: November 8, 2024) |
 |
Title 29 - Labor |
|
Subtitle B - Regulations Relating to Labor |
|
Chapter XVII - Occupational Safety and Health Administration, Department of Labor |
|
Part 1910 - Occupational Safety and Health Standards |
|
Subpart Z - Toxic and Hazardous Substances |
Appendix B to § 1910.1450 - References (Non-Mandatory)
Latest version.
-
The following references are provided to assist the employer in the development of a Chemical Hygiene Plan. The materials listed below are offered as non-mandatory guidance. References listed here do not imply specific endorsement of a book, opinion, technique, policy or a specific solution for a safety or health problem. Other references not listed here may better meet the needs of a specific laboratory. (a) Materials for the development of the Chemical Hygiene Plan:
1. American Chemical Society, Safety in Academic Chemistry Laboratories, 4th edition, 1985.
2. Fawcett, H.H. and W. S. Wood, Safety and Accident Prevention in Chemical Operations, 2nd edition, Wiley-Interscience, New York, 1982.
3. Flury, Patricia A., Environmental Health and Safety in the Hospital Laboratory, Charles C. Thomas Publisher, Springfield IL, 1978.
4. Green, Michael E. and Turk, Amos, Safety in Working with Chemicals, Macmillan Publishing Co., NY, 1978.
5. Kaufman, James A., Laboratory Safety Guidelines, Dow Chemical Co., Box 1713, Midland, MI 48640, 1977.
6. National Institutes of Health, NIH Guidelines for the Laboratory use of Chemical Carcinogens, NIH Pub. No. 81-2385, GPO, Washington, DC 20402, 1981.
7. National Research Council, Prudent Practices for Disposal of Chemicals from Laboratories, National Academy Press, Washington, DC, 1983.
8. National Research Council, Prudent Practices for Handling Hazardous Chemicals in Laboratories, National Academy Press, Washington, DC, 1981.
9. Renfrew, Malcolm, Ed., Safety in the Chemical Laboratory, Vol. IV,
J. Chem. Ed., American Chemical Society, Easlon, PA, 1981.10. Steere, Norman V., Ed., Safety in the Chemical Laboratory,
J. Chem. Ed. American Chemical Society, Easlon, PA, 18042, Vol. I, 1967, Vol. II, 1971, Vol. III 1974.11. Steere, Norman V., Handbook of Laboratory Safety, the Chemical Rubber Company Cleveland, OH, 1971.
12. Young, Jay A., Ed., Improving Safety in the Chemical Laboratory, John Wiley & Sons, Inc. New York, 1987.
(b) Hazardous Substances Information:
1. American Conference of Governmental Industrial Hygienists, Threshold Limit Values for Chemical Substances and Physical Agents in the Workroom Environment with Intended Changes, 6500 Glenway Avenue, Bldg. D-7 Cincinnati, OH 45211-4438 (latest edition).
2. Annual Report on Carcinogens, National Toxicology Program U.S. Department of Health and Human Services, Public Health Service, U.S. Government Printing Office, Washington, DC, (latest edition).
3. Best Company, Best Safety Directory, Vols. I and II, Oldwick, N.J., 1981.
4. Bretherick, L., Handbook of Reactive Chemical Hazards, 2nd edition, Butterworths, London, 1979.
5. Bretherick, L., Hazards in the Chemical Laboratory, 3rd edition, Royal Society of Chemistry, London, 1986.
6. Code of Federal Regulations, 29 CFR part 1910 subpart Z. U.S. Govt. Printing Office, Washington, DC 20402 (latest edition).
7. IARC Monographs on the Evaluation of the Carcinogenic Risk of Chemicals to Man, World Health Organization Publications Center, 49 Sheridan Avenue, Albany, New York 12210 (latest editions).
8. NIOSH/OSHA Pocket Guide to Chemical Hazards. NIOSH Pub. No. 85-114, U.S. Government Printing Office, Washington, DC, 1985 (or latest edition).
9. Occupational Health Guidelines, NIOSH/OSHA NIOSH Pub. No. 81-123 U.S. Government Printing Office, Washington, DC, 1981.
10. Patty, F.A., Industrial Hygiene and Toxicology, John Wiley & Sons, Inc., New York, NY (Five Volumes).
11. Registry of Toxic Effects of Chemical Substances, U.S. Department of Health and Human Services, Public Health Service, Centers for Disease Control, National Institute for Occupational Safety and Health, Revised Annually, for sale from Superintendent of Documents U.S. Govt. Printing Office, Washington, DC 20402.
12. The Merck Index: An Encyclopedia of Chemicals and Drugs. Merck and Company Inc. Rahway, N.J., 1976 (or latest edition).
13. Sax, N.I. Dangerous Properties of Industrial Materials, 5th edition, Van Nostrand Reinhold, NY., 1979.
14. Sittig, Marshall, Handbook of Toxic and Hazardous Chemicals, Noyes Publications, Park Ridge, NJ, 1981.
(c) Information on Ventilation:
1. American Conference of Governmental Industrial Hygienists Industrial Ventilation (latest edition), 6500 Glenway Avenue, Bldg. D-7, Cincinnati, Ohio 45211-4438.
2. American National Standards Institute, Inc. American National Standards Fundamentals Governing the Design and Operation of Local Exhaust Systems ANSI Z 9.2-1979 American National Standards Institute, N.Y. 1979.
3. Imad, A.P. and Watson, C.L. Ventilation Index: An Easy Way to Decide about Hazardous Liquids, Professional Safety pp 15-18, April 1980.
4. National Fire Protection Association, Fire Protection for Laboratories Using Chemicals NFPA-45, 1982.
Safety Standard for Laboratories in Health Related Institutions, NFPA, 56c, 1980.
Fire Protection Guide on Hazardous Materials, 7th edition, 1978.
National Fire Protection Association, Batterymarch Park, Quincy, MA 02269.
5. Scientific Apparatus Makers Association (SAMA), Standard for Laboratory Fume Hoods, SAMA LF7-1980, 1101 16th Street, NW., Washington, DC 20036.
(d) Information on Availability of Referenced Material:
1. American National Standards Institute (ANSI), 1430 Broadway, New York, NY 10018.
2. American Society for Testing and Materials (ASTM), 1916 Race Street, Philadelphia, PA 19103.
Editorial Note: This listing is provided for information purposes only. It is compiled and kept up-to-date by the Department of Labor.
Subject Index for 29 CFR Part 1910—Occupational Safety and HealthStandards Subject term Section No. A-Frame Derricks: (see also Derricks) .181 AIDS (see Bloodborne pathogens) .1030 Aboveground storage tanks, flammable and combustible liquid .106(b)(2) Spacing .106(b)(2)(ii) Venting .106(b)(2) (iv), (v), (vi) Spill control .106(b)(2) (viii) Abrasive Blasting: (see also Ventilation) .94 Air Compressors, Breathing Air .94(a)(6) Air Supply, Breathing .94(a)(6) Blast Cleaning Enclosures .94(a)(3) Cleaning Nozzles .244(b) Dust Hazards .94(a)(2) Abrasive Wheel Machinery: Blotters .215(c)(6) Definitions .211(b) Effective Dates .220 Excluded Machinery .215(a)(5) Flanges .215(a)(3), (c) Guard Design .215(a)(2) Specifications .215(b)(12) Guard Exposure Angles .215(b)(2) Band Type .215(b)(11) Bench and Floor Stands .215(b)(3) Cup Wheels .215(b)(1) Cylindrical Grinders .215(b)(4) Dimensions .215(b)(10) Material Requirements .215(b)(10) Snagging Machines .215(b)(7) Surface Grinding .215(b)(5) Swing Frame .215(b)(6) Guarding .215(a)(1), (b) Mounting .215(d) Arbor Size .215(d)(2) Blotters .215(d)(5) Bushings .215(d)(4) Inspections .215(d)(1) Multiple Wheel .215(d)(6) Ring Test .215(d)(1) Surface Conditions .215(d)(3) Standards Sources .221 Work Rests .215(a)(4) Abrasive Wheel Machinery, Portable: Definitions .241(b) Guarding .243(c) Cup Wheels .243(c)(2) General Requirements .243(c)(1) Other Type Grinders .243(c)(4) Vertical Grinders .243(c)(3) Inspection .243(c)(5) Mounting .243(c)(5) Abrasive Wheels: (see Abrasive Wheel Machinery) Access: Bulk Oxygen Systems .104(b)(2)(ii) Cranes .179(c)(2) Exposure and medical records .1020 Industrial Plants .106(e)(9)(ii) Powered Platforms .66 Processing Plants .106(h)(8)(ii) Spraying Operations, Vents .107(d)(10) Sprinkler valve .107(f)(2) Accident Prevention Signs and Tags: (see also Signs and Tags) .145 Effective Dates .149(a) Standards Sources .150 2-Acetylaminofluorene .1003 Area requirements .1003(c) Closed system operation .1003(c)(2) Isolated systems .1003(c)(1) Maintenance and decontamination activities .1003(c)(5) Open-vessel system operations .1003(c)(3) Transfer from a closed operation .1003(c)(4) Medical surveillance .1003(g) Examinations .1003(g)(1) Records .1003(g)(2) Regulated area requirements .1003(d) Contamination control .1003(d)(4) Emergencies .1003(d)(2) Hygiene facilities and practices .1003(d)(3) Reports .1003(f) Incidents .1003(f)(2) Operations .1003(f)(1) Signs, information, and training .1003(e) Container contents identification .1003(e)(2) Lettering .1003(e)(3) Prohibited statements .1003(e)(4) Signs .1003(e)(1) Training and indoctrination .1003(e)(5) Acetylene .102 Cylinders .102(a), (c) Generators .102(c) Pipe Systems .102(b) Acetylene Generators .253(f) Approval .253(f)(1) Location .253(f)(3) Maintenance .253(f)(7) Marking .253(f)(1) Operation .253(f)(7) Portable .253(f)(5) Pressure Limits .253(f)(2) Rating .253(f)(2) Stationary .253(f)(4) Houses and Rooms .253(f)(6) Acid Carboys .262(nn) Acrylonitrile .1045 Emergency situations .1045(i) Employee information and training .1045(o) Exposure monitoring .1045(e) Housekeeping .1045(k) Hygiene facilities and practices .1045(m) Medical surveillance .1045(n) Methods of compliance .1045(g) Notification of regulated areas and emergencies .1045(d) Observation and monitoring .1045(r) Permissible exposure limit .1045(c) Protective clothing and equipment .1045(j) Recordkeeping .1045(q) Regulated areas .1045(f) Respiratory protection .1045(h) Signs and labels .1045(p) Waste disposal .1045(l) Adjustments: Cranes .179(l)(3) Derricks .181(f)(2), (3) AEC Licensees .96(p) Agricultural Operations .267 Air Compressors, Abrasive Blasting .94(a)(6), .134(d)(2)(ii) Air Contaminants .1000, .1001 Effective Dates .98, .1000 Exposure Limits .1000, .1001 Permissible exposure limits .1000 Standards Sources .99 Air Controlling Equipment, Power Presses .217(b)(10) Air Lift Hammers, Forging .218(e)(1) Air Quality .134(d) Air Receivers: Application .169(a)(1) Compressed Air .169 Equipment: Drains .169(b)(2) Installation .169(b)(1) Pressure Gages .169(b)(3) Traps .169(b)(2) Valves .169(b)(3) Standards Sources .169(a)(2), .170 Air Supply .94(a)(6), .134(d) Airborne Radioactive Materials Exposure Limits .96(c) Airhoses .243(b)(2) Aisles: Working Surfaces .22(b) Alarms: (see also Fire Alarms, Sprinklers, Warning Devices) Employee alarm systems .165 Mills and Calenders .216(g) Rubber and Plastics .216(g) 4-Aminodiphenyl .1003 Area requirements .1003(c) Closed system operation .1003(c)(2) Isolated systems .1003(c)(1) Maintenance and decontamination activities .1003(c)(5) Open-vessel system operations .1003(c)(3) Transfer from a closed operation .1003(c)(4) Medical surveillance .1003(g) Examinations .1003(g)(1) Records .1003(g)(2) Regulated area requirements .1003(d) Contamination control .1003(d)(4) Emergencies .1003(d)(2) Hygiene facilities and practices .1003(d)(3) Reports .1003(f) Incidents .1003(f)(2) Operations .1003(f)(1) Signs, information, and training .1003(e) Container contents identification .1003(e)(2) Lettering .1003(e)(3) Prohibited statements .1003(e)(4) Signs .1003(e)(1) Training and indoctrination .1003(e)(5) Ammonia, Anhydrous: (see also Anhydrous Ammonia) .111 Ammonium Nitrate .109(i) Bulk Storage .109(i)(4) Containers .109(i)(3) Contaminants .109(i)(5) Electrical Installations .109(i)(6) Fire Protection .109(i)(7) Separation Walls .109(i)(5) Warehouses .109(i)(4) Anchoring Fixed Machinery .212(a)(5), (b) Anhydrous Ammonia: Containers: Appurtenances .111(b)(6) Charging .111(b)(11) DOT .111(e) Farm Vehicles .111(g), (h) Location .111(b)(5) Motor Vehicle .111(f) Markings .111(b)(3) Non-Refrigerated .111(b)(2), (c) Refrigerated .111(d) Markings .111(b)(4) Safety Relief Devices .111(b)(9), (c)(3), (d)(4), (f)(5) Electrical Systems .111(b)(16) Fittings .111(b)(7) Handling .111 Hoses .111(b)(8) Liquid Level Gaging Devices .111(b)(14) Liquid Transfer .111(b)(12), (f)(6) Piping .111(b)(7) Standards Sources .115 Storage .111 Tank Car Unloading .111(b)(13) Tubing .111(b)(7) Appliances: Electric .306(d)(1) Liquefied Petroleum Gases .110(b)(20), (g)(11) Arbor Grinding Wheels .215(d)(2) Arc Welding .254 Environmental Conditions .254(b)(2) Equipment: Design .254(b)(4) Disconnecting Means .305(j)(3) Grounding .254(c)(2) Installation .254(c) Maintenance .254(d)(9) Operation .254(d) Personnel Protection .252(b) Protection from Rays .252(b)(2)(iii) Supply Connections .254(c)(3), (d)(3) Health Protection .252(c) Ventilation .252(b)(4)(ii), (c) Voltage .254(b)(3) Arsenic, Inorganic .1018 Asbestos: Airborne Concentration .1001(c) Caution Signs and Labels .1001(g) Change Rooms .1001(d)(4) Compliance .1001(f) Definitions .1001(a) Exposure, Permissible .1001(c) Fibers Exposure, Permissible .1001(b) Hazard Communication .1001(j) Housekeeping .1001(k) Hygiene Facilities and Practices .1001(i) Medical Surveillance .1001(l) Measurements .1001(e) Medical Examinations .1001(j) Monitoring .1001(d) Personal Protective Equipment .1001(h) Recordkeeping .1001(m) Regulated Areas .1001(e) Respiratory protection .1001(g) Special Clothing .1001(d)(3) Waste Disposal .1001(h)(2) Atmospheric Contaminants: (see Air Contaminants) Atmospheric Tanks .106(b)(1)(iii) Attendants: Liquified Hydrogen Systems .103(c)(4)(ii) Liquefied Petroleum Gases .110(b)(14) Automatic Sprinkler Systems: (see also Sprinkler Systems, Automatic) .159 Automobile Undercoatings .107(k) Baffle Plates: Spray Booths .107(b)(4) Bakery Equipment .263(k) Air Conditioning .268(i)(14) Bag Chutes and Lifts .263(d)(2) Biscuit Equipment .263(k) Blenders .263(d)(3) Bolting Reels .263(d)(5) Conveyors .263(d)(7), (i)(7) Cracker Equipment .263(k) Dividers .263(f) Dough Brakes .263(h) Dumpbins .263(d)(3) Flour Elevators .263(d)(4) Flour Handling Equipment .263(d) Machine Guarding .263(c) Miscellaneous Equipment .263(i) Mixers .263(e) Moulders .263(g) Ovens .263(l) Pulverizers .263(k)(2) Scales, Flour .263(d)(9) Sifters .263(d)(8) Slicers .263(j) Storage Bins .263(d)(6) Wrappers .263(j) Ballast, Cranes .180(i)(2) Band Saws and Resaws .213(i) Barking Devices: Hydraulic .261(e)(14) Pulp Wood and Chips .261(c), (e)(8) Sawmills .265(d)(4) Barrels: Guarding .212(a)(4) Basket Derricks: (see Derricks) .181 Bathing Facilities: Labor Camps .142(f) Battery Changing and Charging .178(g), .305(j)(7) Bearings .219(j), (p)(3) Belts: Definitions .211(f)(1)-(3) Manlifts .68(c)(1) Power Transmission Apparatus .219(e)(1), (o)(3), (p)(6) Bench and Floor Stands Guarding .215(b)(3) Benzene .1028 Communication of benzene hazards to employees .1028(j) Exposure monitoring and measurement .1028(e) Medical surveillance .1028(i) Methods of compliance .1028(f) Observation of monitoring .1028(l) Permissible exposure limit .1028(c) Protective clothing and equipment .1028(h) Recordkeeping .1028(k) Regulated areas .1028(d) Respiratory protection .1028(g) Benzidine .1003 Area requirements .1003(c) Closed system operation .1003(c)(2) Isolated systems .1003(c)(1) Maintenance and decontamination activities .1003(c)(5) Open-vessel system operations .1003(c)(3) Transfer from a closed operation .1003(c)(4) Medical surveillance .1003(g) Examinations .1003(g)(1) Records .1003(g)(2) Regulated area requirements .1003(d) Contamination control .1003(d)(4) Emergencies .1003(d)(2) Hygiene facilities and practices .1003(d)(3) Reports .1003(f) Incidents .1003(f)(2) Operations .1003(f)(1) Signs, information, and training .1003(e) Container contents identification .1003(e)(2) Lettering .1003(e)(3) Prohibited statements .1003(e)(4) Signs .1003(e)(1) Training and indoctrination .1003(e)(5) Beryllium .1000, Table Z-2 Bins, Bulk Storage of Explosives .109(g)(4) Biological Hazards Signs and Tags .145(e)(4), (f)(8) Blades Exposure .212(a)(5) Blankets, Rubber Insulating .137 Blasting Agents (see also Explosives and Blasting Agents) .109(g), (k) (1), (2), .119 Bulk Delivery .109(g)(3), (h)(4) Bulk Storage Bins .109(g)(4) Effective Dates .114 Mixing, Fixed Location .109(g)(2), (h)(3) Mixing Vehicles .109(g)(3), (h)(4) Slurries .109(h) Standards Sources .115 Storage .109(g)(5) Transportation .109(g)(6) Use .109(g)(7) Water Gels .109(h) Bleaching: Pulp and Paper Mills .261(h) Textiles .262(p) Bloodborne pathogens .1030 Effective dates .1030(i) Engineering and work-practice controls .1030(d)(2) Housekeeping .1030(d)(4) Laboratories and production facilities, HIV and HBVresearch .1030(e) Personal protective equipment .1030(c)(2)(ii), (d)(2)(i), (3) Recordkeeping .1030(f)(6), (h) Training .1030(e)(5), (g)(2) Vaccinations, HBV .1030(f) Warning labels an signs .1030(g)(1) Blotters .215(c)(1)(v), (c)(6), (d)(5) Board Drop Hammers .218(e)(2) Boatswain's Chair Scaffolds .28(j) Employee Protection .28(j)(4) Fiber Ropes .28(j)(2) Life Belts .28(j)(4) Roof Irons, Hooks .28(j)(6) Seat Slings .28(j)(3) Size .28(j)(1) Tackle .28(j)(5) Boom Guards: Cranes .180(j)(2) Derricks .181(j)(5)(ii) Booms, Derricks .181(i)(6) Boring Machines .213(l) Brakes: Bandsaws .213(j)(1) Bridges .179(f)(4), (6) Control .179(f)(3) Cranes .179(f) Friction, Power Presses .217(b)(2) Hoists .179(f)(1) Holding .179(f)(2) Industrial Trucks .178(g), (h), (m)(5) Manlifts .68(c)(1)(i) Power Control .179(f)(3) Trolleys .179(f)(4), (5) Brazing: (see also Welding) .252 Definitions .251 Standards Sources .256 Breast Derricks: (see also Derricks) .181(a)(4) Bricklayers’ Square Scaffolds .28(l) Bridge Bumpers, Cranes .179(e)(2) Bridge Plates: (see also Dockboards) .30(a) Buffing: (see Grinding, Polishing and Buffing) Building Maintenance Powered Platforms .66 Buildings, Sawmills .265(c) Bulk Delivery: Blasting Agents .109(g)(3), (h)(4) Explosives .109(h)(4) Bulk Oxygen Systems .104 Accessibility .104(b)(2)(ii) Cleaning .104(b)(8)(i) Clear Zone .104(b)(10)(ii) Containers .104(b)(4), (6) Gaseous .104(b)(4)(iii) Liquid .104(b)(4)(ii) Dikes .104(b)(2)(v) Distances from Hazards .104(b)(3) Combustible Liquids .104(b)(3)(vii), (viii) Combustible Materials .104(b)(3)(x) Combustible Structures .104(b)(3)(ii) Congested Areas .104(b)(3)(xiii) Fire Resistant Structures .104(b)(3)(iii) Flammable Gases .104(b)(3)(ix) Flammable Liquids .104(b)(3)(v), (vi) Openings .104(b)(3)(iv) Slow-Burning Materials .104(b)(3)(xi) Electrical Wiring .104(b)(8)(ix) Firewalls .104(b)(3)(viii) Fittings .104(b)(5) Inspection .104(b)(10)(i) Installation .104(b)(8)(iv) Joints .104(b)(8)(ii) Leakage .104(b)(2)(iii) Liquid Oxygen Vaporizers .104(b)(7) Grounding .104(b)(7)(iv) Location .104(b)(2) Maintenance .104(b)(10) Marking .104(b)(8)(viii) Operating Instructions .104(b)(9) Piping .104(b)(5) Placarding .104(b)(8)(viii) Safety Relief Devices .104(b)(6), (7)(ii) All Containers .104(b)(6)(i) ASME Containers .104(b)(6)(iii) DOT Containers .104(b)(6)(ii) Security .104(b)(8)(vi) Storage Containers .104(b)(4), (6) Testing .104(b)(8)(v) Tubing .104(b)(5) Vaporizers .104(b)(7) Ventilation .104(b)(3)(xii) Venting .104(b)(8)(vii) Bulk Plants, Flammable and Combustible Liquids .106(f) Buildings .106(f)(2) Drainage .106(f)(7) Electrical Equipment .106(f)(5) Fire Protection .106(f)(8) Ignition Sources .106(f)(6) Liquid Storage .106(f)(1) Loading .106(f)(3) Waste Disposal .106(f)(7) Wharves .106(f)(4) Bumpers: Bridge .179(e)(2) Trolley .179(e)(3) 1,3 Butadiene: Permissible Exposure Limits .1051(c) Exposure Monitoring .1051(d) Regulated Areas .1051(e) Methods of Compliance .1051(f) Exposure Goal Program .1051(g) Respiratory Protection .1051(h) Protective Clothing and Equipment .1051(i) Emergency Situations .1051(j) Medical Screening and Surveillance .1051(k) Communication of BD Hazards to Employees .1051(l) Recordkeeping .1051(m) Cabinets, Flammable and Combustible Liquid storage .106(d)(3) Size .106(d)(3)(i) Fire resistance .106(d)(3)(ii) Cabs: Cranes .179(c), (o)(2); 180(i)(3) Derricks .181(j)(6) Cadmium .252(c)(9) Airborne Concentration .1027(c) Compliance .1027(f) Confined Spaces .252(c)(9)(ii) Emergency Situations .1027(h) Exposure, Permissible .1027(c) Hazard Communication .1027(m) Housekeeping .1027(k) Hygiene Areas and Practices .1027(j) Indoors .252(c)(9)(i) Medical Surveillance .1027(l) Monitoring .1027(d) Personal Protective Equipment .1027(i) Clothing .1027(i) Recordkeeping .1027(n) Regulated Areas .1027(e) Respiratory protection .1027(g) Warning Labels .252(c)(1)(v), Calcium Carbide: Indoors .253(g)(2) Packaging .253(g)(1) Storage .253(g)(2), (3) Calenders .262(ee) Rubber and Plastics Industry: Alarms .216(g) Location Protection .216(d)(2) Safety Controls .216(c) Stopping Limits .216(f)(1), (3) Switches, Trip and Emergency .216(e) Textiles .262(ee) Canisters, Gas Mask: (see Gas Mask Canisters, Respirators) Cantilever Gantry Cranes: (see Gantry Cranes) Carpenters’ Bracket Scaffolds .28(k) Bracket Attachment .28(k)(2) Bracket Dimensions .28(k)(1) Employee Protection .28(k)(3) Guardrails .28(k)(5) Platform Size .28(k)(4) Caustics .262(oo) Emergency Showers .261(g)(18)(i) Pipeline Identification .261(h)(3)(vi) Caution Signs and Labels .145(c)(2), (d)(4) Asbestos .1001(g) Fluorides .252(c)(1)(iv) Ionizing Radiation .96(e), (g), (h) Welding .252(c)(1)(iv) Ceiling Workers’ Scaffolds: (see also Plasterers’Scaffolds) .28(o) Chain Guarding .219(f) Change Rooms: Asbestos .1001(d)(4) Drying Facilities .141(f) Separate Facilities .141(e) Charge Initiation .109(e)(4) Chemical Plants: (see also Refineries, Chemical Plants andDistilleries) .106(i) Chemicals, hazard communication .1200 Chemicals, hazardous; occupational exposure in laboratories: Chemical Hygiene Plan .1450(e) Exposure determination, monitoring .1450(d) Hazard identification .1450(h) Hygiene recommendations .1450, App. A Medical consultations and examinations .1450(g) Permissible exposure limits .1450(c) Recordkeeping .1450(j) Respirator use .1450(i) Training .1450(f) Chemicals, highly hazardous; process safety management .119 Chemicals, toxic and reactive, threshold list .119, App. A Compliance guidelines .119, App. A Contractor, employer responsibilities .119(h) Emergency planning and response .119(h) Hot work (welding) permits .119(n) Trade secrets .119(p) Training .119(g) Chicago Boom Derricks: (see also Derricks) .181 Chicken Ladders: (see also Crawling Boards) .28(t) bis-Chloromethyl ether .1003 Area requirements .1003(c) Closed system operation .1003(c)(2) Isolated systems .1003(c)(l) Maintenance and decontamination activities .1003(c)(5) Open-vessel system operations .1003(c)(3) Transfer from a closed operation .1003(c)(4) Medical surveillance .1003(g) Examinations .1003(g)(1) Records .1003(g)(2) Regulated area requirements .1003(d) Contamination control .1003(d)(4) Emergencies .1003(d)(2) Hygiene facilities and practices .1003(d)(3) Reports .1003(f) Incidents .1003(f)(2) Operations .1003(f)(1) Signs, information, and training .1003(e) Container contents identification .1003(e)(2) Lettering .1003(e)(3) Prohibited statements .1003(e)(4) Signs .1003(e)(1) Training and indoctrination .1003(e)(5) Chute Openings .23(a)(2) Circular Resaws .213(e) Circular Saws .213(f) Arbors .213(s)(4) Portable .243(a)(1) Clean Air, Spray Finishing .94(c)(7) Cleaning: Air Receivers .169 Bulk Oxygen Systems .104(b)(8)(i) Compressed Air .242(b) Powder Coatings .107(l)(4)(i) Powered Platforms .66(e)(7) Respirators .134(f)(3) Solvents .107(g)(5) Spray Booths .107(b)(9) Spraying Operations .107(g)(2) Cleaning Compounds .252(c)(11) Degreasing .252(c)(11)(ii) Manufacturer's Instructions .252(c)(11)(i) Cleaning Solvents: Spraying .107(g)(5) Clear Zones: Bulk Oxygen Systems .104(b)(10) Industrial Plants .106(e)(9)(iv) Liquefied Hydrogen Systems .103(c)(5)(ii) Processing Plants .106(h)(8)(iv) Clearances: Cranes .179(b)(6), .180(j)(1) Derricks .181(j)(5) Fixed Ladders .27(c) Back .27(c)(4) Climbing Side .27(c)(1) Grab Bars .27(c)(5) Hatch Covers .27(c)(7) Step-Across Distance .27(c)(6) With Cages or Baskets .27(c)(3) Without Cages or Wells .27(c)(2) Manlifts .68(b)(11) Spraying Discharges .107(d)(8) Stairs .24(i) Clothing, Protective: (see also Personal Protective Equipment) .252(b)(3), .132 Asbestos .1001(d)(3) Body .156(e)(3) Electrical .137 Eye .133, .156(e)(5) Face .133,.156(e)(5) Fire brigade .156 Footwear .136,.156(e)(2) Goggles .133 Hand .156(e)(4) Head .135, .156(e)(5) Helmets .135 Leg .156(e)(3) Rubber .137 Storage .107(g)(4) Welders .252(b)(3) Clutches .217(b)(3), (7) Definition .180(a)(19) Power Transmission Apparatus .219(k) Coatings, Spray: Dual Component .107(m) Organic Peroxide .107(m) Powder .107(l) Undercoatings .107(k) Collars .219(i) Coke oven emissions .1029 Employee information and training .1029(k) Exposure monitoring and measurement .1029(e) Hygiene facilities and practices .1029(i) Medical surveillance .1029(j) Methods of compliance .1029(f) Observation of monitoring .1029(n) Permissible exposure limit .1029(c) Protective clothing and equipment .1029(h) Precautionary signs and labels .1029(l) Recordkeeping .1029(m) Regulated areas .1029(d) Respiratory protection .1029(g) Color Codes: Air Contaminants .134(g)(6) Danger .144(a)(1)(ii), .145((d)(2) Effective Dates .149 Gas Mask Canisters .134(g)(6) Physical Hazards, Colors .144(a), .145(d)(2) Respirators .134(g)(6) Standards Sources .150 Stop .144(a)(1)(iii) Combustible Dusts, Trucks Used .178(c)(2)(vi) Combustible Liquids: (see Flammable and CombustibleLiquids) .106 Effective Dates .114 Standards Sources .115 Combustible Materials: Welding .252(a)(2) Communicable Diseases Reporting: Labor Camps .142(l) Communications, Powered Platforms .66(e)(11)(vi) Compressed Air, Cleaning .242(b) Compressed Air Equipment: (see also Compressed Gas Equipment) Air Receivers .169 Compressed Gas Cylinders: (see also Compressed Gases) .253(a)(2) Approval .252(b)(1) Inspection .101(a) Manifolding .253(c) Markings .253(b)(1) Operating Procedures .253(b)(5) Oxygen Manifolds .253(c)(2), (3) Public Protection .101(c), .252(a)(8) Safety Relief Valves .101(c) Standards Sources .170 Storage .253(b)(2)-(4) Compressed Gas Equipment: (see Compressed Gas Cylinders) Compressed Gases: (see also Compressed Gas Cylinders) .101 Effective Dates .114 Handling .101(b) Safety Relief Devices .101(c) Standards Sources .115 Storage .101(b) Conductors: (see also Electric Wiring) Cranes .179(g)(1)(iv), (6) General Wiring .305(f) Confined Spaces, Hazardous work .120(b)(4)(ii)(I), (c)(3) Electrical safety-related work practices .333(c)(5) Confined Spaces: Atmospheric testing flow charts .146, App. B Attendant duties .146(i) Authorized entrant duties .146(h) Entry supervisor duties .146(j) Flow chart, decisions .146, App. A Instruction of employees relating to .21(b)(6) Permit samples .146, App. D Program examples .146, App. C Rescue and emergency services .146(k) Sewer system entry .146, App. E Training .146(g) Welding and Cutting .353(b), .352(g) Containers: (see also Tank Storage, Portable) Ammonium Nitrate .109(i)(3) Bulk Oxygen Systems .104(b)(4), (6) Gaseous .104(b)(4)(iii) Liquid .104(b)(4)(ii) Flammable and Combustible Liquids .106(d) Design .106(d)(2) Bulk plants, storage .106(f) Industrial plants, storage .106(e)(2)(ii) Service stations, storage .106(g)(1) Processing plants .106(h)(4) Gaseous Hydrogen Systems .103(b)(1)(i) Guarding .212(a)(4) Liquified Hydrogen Systems .103(c)(1)(i) Liquefied Petroleum Gases .110 Spraying .107(e)(3), (5) Welding, Gas .253(a), (b) Containers, Liquefied Petroleum Gases .110 Accessories .110(b)(7); (c)(6); (d)(3), (8); (e)(5) Awaiting Use or Resale .110(f) Capacity .110(d)(6), (h)(5) Charging Plants .110(d)(13) Construction .110(b)(3) Cylinder Systems .110(c) Accessories .110(c)(6) Indoor .110(c)(5) Markings .110(c)(2) Outdoor .110(c)(4) Valves .110(c)(6) Filling Densities .110(b)(12) Fire Protection .110(d)(14) Fittings .110(b)(8); (e)(6); (h)(7), (9) Hoses .110(b)(9) Industrial Plants .110(d)(12) Installation .110(e)(4), (h)(6) Lighting .110(d)(16) Location .110(b)(6), (f)(5) Markings .110(b)(5), (c)(2) Non-DOT Containers .110(d) Accessories .110(d)(3) Capacity .110(d)(6) Installation .110(d)(7) Pipes .110(d)(3) Pressure, Design .110(d)(2) Reinstallation .110(d)(5) Safety Relief Devices .110(d)(4) Valves .110(d)(3) Original Testing .110(b)(4) Piping .110(b)(8), (d)(3), (e)(6), (h)(10), (h)(9) Pressure Design .110(d)(2), (e)(3) Safety Relief Devices .110(b)(10), (c)(7), (d)(4), (e)(7), (h)(4) Tubing .110(b)(8), (e)(6) Valves .110(b)(7), (c)(6), (d)(3), (e)(5), (h)(9) Vaporizers .110(b)(11), (d)(17), (e)(8) Welding .110(b)(4) Controllers: Cranes .179(g)(3) Conveyors: Bakeries .263(d)(7), (i)(7) Electrostatic Spraying .107(h)(7) Forging Machines .218(j)(3) Sawmills .265(c)(18) Spray Booths .107(b)(7) Corrosion Protection: Piping, Valves and Fittings .106(c)(5) Storage Tanks .106(b)(1)(vi) Underground Tanks .106(b)(3)(iii) Cotton Dust .1043 Counterbalances .217(b)(9) Counterweights: Cranes .180(i)(2) Covers, Openings: Working Surfaces .22(e);23(a)(1), (3)(i), (5), (6), (8)(ii), (9) Cranes: Crawler .180 Definitions .179(a) Effective Dates .179(b)(2), .180(b)(2), .182 Electric .306(b) Gantry .179 Locomotive .180 Overhead .179 Pulp and Paper Mills .261(c)(8) Standards Sources .183 Truck .180 Crawler Cranes: (see also Crawler, Locomotive and Truck Cranes) .180 Crawler, Locomotive and Truck Cranes .180 Cabs .180(i)(3) Electric Power Lines .180(j) Fire Extinguishers .180(i)(5) Inspections .180(d) Frequent .180(d)(3) Idle (Irregular) .180(d)(5) Initial .180(d)(1) Periodic .180(d)(4) Records .180(d)(6) Ropes .180(g) Load Handling .180(h) Load Ratings .180(c) Maintenance .180(f) Refueling .180(i)(4) Rope Inspection .180(g) Standards Sources .183 Swinging Locomotives .180(i)(6) Testing .180(e) Crawling Boards .28(t) Crosscut Table Saws .213(d) Cup Wheels .243(c)(2) Flaring-Cup, Type 11 .241(b)(8) Straight-Cup, Type 6 .241(b)(9) Straight, Type 1 .241(b)(10) Curing Apparatus: (see Drying, Curing and Fusion Apparatus) Cutting: (see also Welding) .252 Containers .252(a)(3) Definitions .251 Ventilation .252(c) Cutting-Off Machines .215(b)(5) Cutoff Couplings .219(k)(1) Cutoff Saws, Swing .213(g) Cylinders, Welding Gas .253(b) Manifolding .253(c) Operating Procedures .253(b)(5) Storage .253(b)(2)-(4) Cylindrical Grinders .215(b)(4) Danger: Color Codes .144(a)(1)(ii) Signs .145(c)(1), (d)(2) Tag .145(f)(5) Dates, Effective: (see Effective Dates) DBCP (1,2-Dibromo 3-Chloropropane) .1044 Emergency situations .1044(i) Employee information and training .1044(n) Exposure monitoring .1044(f) Housekeeping .1044(k) Hygiene facilities and practices .1044(l) Medical surveillance .1044(m) Methods of compliance .1044(g) Notification of use .1044(d) Observation of monitoring .1044(q) Permissible exposure limit .1044(c) Protective clothing and equipment .1044(j) Recordkeeping .1044(p) Regulated areas .1044(e) Respirators .1044(h) Signs and labels .1044(o) Dead-Man Controls .243(a)(2) Decorations: Egress .37(l) Explosives .37(l) Decorators’ Scaffolds: (see also Plasterers' Scaffolds) .28(o) Degreasing: Cleaning Compounds .252(c)(11)(ii) Derricks: Adjustments .181(f)(3) Cabs .181(j)(6) Electric Power Lines .181(j)(5) Fire Extinguishers .181(j)(3) Guards .181(j)(1) Hooks .181(j)(2) Inspections .181(d) and (g) Load Handling .181(i) Load Ratings .181(c) Maintenance .181(f) Operations .181(h) Refueling .181(j)(4) Repairs .181(f)(3) Rope Inspections .181(g) Standards Sources .183 Testing .181(e) 3,3′-Dichlorobenzidine (and its salts) .1003 Area requirements .1003(c) Closed system operation .1003(c)(2) Isolated systems .1003(c)(1) Maintenance and decontamination activities .1003(c)(5) Open-vessel system operations .1003(c)(3) Transfer from a closed operation .1003(c)(4) Medical surveillance .1003(g) Examinations .1003(g)(1) Records .1003(g)(2) Regulated area requirements .1003(d) Contamination control .1003(d)(4) Emergencies .1003(d)(2) Hygiene facilities and practices .1003(d)(3) Reports .1003(f) Incidents .1003(f)(2) Operations .1003(f)(1) Signs, information, and training .1003(e) Container contents identification .1003(e)(2) Lettering .1003(e)(3) Prohibited statements .1003(e)(4) Signs .1003(e)(1) Training and Indoctrination .1003(e)(5) Dies .217(d) Changing .218(h)(5) Fastening .217(d)(7) Guide Post Hazards .217(d)(4) Handling .217(d)(3), (8) Requirements .217(d)(1) Scrap: Ejecting .217(d)(2) Handling .217(d)(3) Selling .217(d)(9) Stroke .217(d)(6) Tonnage .217(d)(6) Unitized Tooling .217(d)(5) Weight .217(d)(6) Diesel Powered Trucks .178(b)(1)-(3) Dikes: Bulk Oxygen Systems .104(b)(2)(v) Storage Tanks .106(b)(2)(vii), (c) 4-Dimethylaminoazobenzene .1003 Area Requirements .1003(c) Closed System Operation .1003(c)(2) Isolated Systems .1003(c)(1) Maintenance and decontamination activities .1003(c)(5) Open-vessel System Operations .1003(c)(3) Transfer from a closed operation .1003(c)(4) Medical surveillance .1003(g) Examinations .1003(g)(1) Records .1003(g)(2) Regulated Area Requirements .1003(d) Contamination Control .1003(d)(4) Emergencies .1003(d)(2) Hygiene facilities and practices .1003(d)(3) Reports .1003(f) Incidents .1003(f)(2) Operations .1003(f)(1) Signs, Information, and Training .1003(e) Container Contents Identification .1003(e)(2) Lettering .1003(e)(3) Prohibited Statements .1003(e)(4) Signs .1003(e)(1) Training and Indoctrination .1003(e)(5) Dining Facilities: (see also Lunchrooms) Labor Camps .142(i) Dip Tanks: .123-.126 Application .123(a) Bottom Drains .125(c) Construction .124(a), .125(a) Conveyors .125(d), .126(g)(2) Covers .125(f)(3) Electrical Ignition Sources .125(e)(1) Electrostatic Apparatus .126(g) Fire Extinguishers .125(f)(2)(i) Fire Protection .125(f) Flow Coating .126(b) Hardening .126(a)(1)(i),(ii) Heating .125(g) Ignition Sources .125(e) Inspections .124(j)(1),(3) Liquid Storage .125(e)(2) Maintenance .125(e)(4) Overflow Pipes .125(b) Sprinklers .125(f) Tempering .126(a) Ventilation .124(b), .125(d)(2) Warning Signs .125(e)(2) Waste Cans .125(e)(4)(ii),(iii) Disposal Systems: (see Waste Disposal Systems) Distances From Hazards: Ammonium Nitrate .109(i)(5) Bulk Oxygen Systems .104(b)(3) Electrostatic Spraying .107(h)(6) Explosives Storage .109(c) Ignition Sources, Separation .107(c)(2) Spray Booths, Separations .107(b)(8) Distilleries: (see also Refineries, Chemical Plants and Distilleries) .106(i) Distribution Plates: Spray Booths .107(b)(4) Dividers, Bakery Equipment .263(f) Diving, Commercial .401, .410, .411, .420-.427, .430, .440, .441 Scientific .401(iv), 402, Appendix B Dockboards .30(a) Dough Brakes, Manually Fed .263(h) Drag Saws .213(r) Drainage: Bulk Plants .106(f)(7) Industrial Plants .106(e)(3)(iii) Labor Camps .142(a) Materials Handling .176(d) Processing Plants .106(h)(3)(ii) Service Stations .106(g)(7) Sprinkler Systems .159(c)(7) Storage Tanks .106(b)(2)(vii)(c) Drains: Air Receivers .169(b)(2) Dressing Rooms, Personnel .141(e) Drips, Condensed Gas .110(d)(11) Drives—Belt, Rope and Chain .219(e), (g), (o)(3) Belt Tighteners .219(e)(6) Cone-Pulley Belts .219(e)(5) Horizontal Belts and Ropes .219(e)(1)(i) Inclined Belts .219(e)(3) Overhead Horizontal Belts .219(e)(2) Vertical Belts .219(e)(3), (4) Drums .212(a)(4) Dry Chemical Extinguishing Systems, Fixed .161 Scope and Application .161(a) Specific Requirements .161(b) Drying: Spraying Operations .107(d)(12) Drying, Curing, and Fusion Apparatus .107(j) Adjacent System .107(j)(3) Alternate Use: Permitted .107(j)(4) Prohibited .107(j)(2) Conformance .107(j)(1) Powder Coatings .107(l)(3) Spraying Rooms .107(j)(2) Dual Component Coatings .107(m) Dust Hazards: Abrasive Blasting .94(a)(2) Asbestos .19, .93a Employee Exposure .1000(a) Grain handling facilities .272 Effective Dates: Abrasive Wheels .220 Accident Prevention Signs and Tags .149 Acetylene .114 Air Contaminants .98 Anhydrous Ammonia .114 Asbestos .1001(b)(1), (2); .98 Blasting Agents .114 Clothing, Protective .138 Color Codes .149 Combustible Liquids .114 Compressed Gases .114 Cooperage Machinery .220 Crawler, Locomotive, and Truck Cranes .180(b)(2), .182 Derricks .181(b)(2), .182 Dies .217(d)(1) Dip Tanks .114 Environmental Controls .98, .149 Explosives .114 Federal Standards .17 Flammable Liquids .114 Forging .221 Guarding Machinery .220 Hand-Held Equipment .245 Hazardous Materials .114 Hydrogen .114 Indoor Storage .182 Ionizing Radiation .98 Labor Camps .142(d)(7), .149(b) Liquefied Petroleum Gases .110(b)(19)(i), (i)(3); .11 Machinery .221 Machinery Guarding .220 Materials Handling .182 Mechanical Power Presses .220 Mechanical Power Transmission Apparatus .221 Mills and Calenders .216(a)(1), (2); .220 National Electrical Code .309 Nitrous Oxide .114 Noise Exposure .98 Nonionizing Radiation .98 Nonwater Disposal Systems .149 Occupational Health .98 Overhead and Gantry Cranes .179(b)(2), .182 Oxygen .114 Physical Hazards Markings .149 Powered Industrial Trucks .182 Powered Tools, Hand and Portable .245 Pulp and Paper Mills .261(n) Pulpwood Logging .266(f) Safety Color Codes .149 Sanitation .149 Sawmills .265(j) Signs and Tags .149 Spray Finishing .114 Standpipe and Hose Systems .165 Ventilation .98 Woodworking .220 Egress Means: (see also Exits) Access to Exits .37(f), (g), (j), (l) Alarms, Fire .37(n) Application .36(a) Automatic Sprinkler Systems .37(m) Definitions .35 Discharge From Exits .37(h) Elevation Changes .37(j) Employee Capacity .36(c) Exit Arrangements .37(e) Exit Capacity .37(c), (d) Exit Components .37(a) Exit Markings .37(q) Exit Width .37(c) Exterior Exit Access .37(g) Furnishings and Decorations .37(l) General Requirements .36 Headroom .37(i) Lighting .36(b)(6) Maintenance .37(k) Occupant Load .37(d) Paints .37(o) Protective Enclosures .37(b) Sprinklers .37(d)(2), (m) Standards Sources .39 Workmanship .37(k) Electric controls, Mechanical Power Presses .217(b)(8) Electric energy, hazardous; control of (see Lockout/tagout) Electric Equipment: (see Electrical Wiring) Electric Ignition Sources: (see Ignition Sources) .107(c), (d)(5) Electric Motor Ignition Sources .107(d)(5) Electric power generation, transmission, and distribution .269 Definitions .269(x) Enclosed spaces .269(e) Fall protection .269(g)(1) Hazardous energy control (Lockout/tagout) .269(d) Ladders, platforms, steps, etc .269(h) Live-line tools .269(j) Materials handling and storage .269(k) Mechanical equipment .269(p) Medical services and first aid .269(b) Overhead lines .269(q) Personal protective equipment .269(g), (n)(4), (r)(2)(v), (r)(4)(ii) Power tools, hand and portable .269(i) Telecommunications facilities .269(s) Testing and test facilities .269(o) Training .269(a)(2), (b)(1), (d)(2), (e)(2), (q)(3)(i), (r)(1)(vi) Tree trimming, line-clearance .269(r), (a)(1)(E) Water, work near .269(w)(5) Electric Power Lines: Crane Operations .180(j) Boom Guards .180(j)(2) Clearances .180(j)(1) Notifying Owners .180(j)(3) Overhead Wires .180(j)(4) Derrick Operations .181(j)(5) Boom Guards .181(j)(5)(ii) Clearances .181(j)(5)(i) Notifying Owners .181(j)(5)(iii) Overhead Wires .181(j)(5)(iv) Safety-related work practices .333(c)(3) Electric Powered Trucks .178(b)(4)-(7), .120(g)(3) Electric wiring: Ammonium Nitrate .109(i)(6) Appliances .305(j)(3) Approval .303(a) Arcing Parts .303(d) Attachment Plugs (Caps) .304(j)(2) Boxes .305(b) Branch Circuits .304(b) Bulk Oxygen Systems .104(b)(8)(ix) Bulk Plants .106(f)(5) Cabinets .305(b) Capacitors .305(i)(6) Communications Systems .308(e) Conductors .305(f) Cranes .179(g), .306(b) Data Processing Systems .306(e) Electrolytic Cells .306(h) Elevators .306(c) Emergency Systems .308(b) Enclosures for Damp or Wet Locations .305(e) Escalators .306(c) Examination of Equipment .303(b)(1) Fire Protective Signaling Circuits .308(d) Fittings .305(b) Fixture Wires .305(i) Flexible Cords and Cables .305(g) General requirements .303 Grounded and Grounding Conductors, Installation and Use .304(a) Grounding .304(f) Guarding Live Parts .303(g)(2), (h)(2) Hand Spraying .107(i)(5) Hazardous (Classified) Locations .307 Heating Equipment .306(g) High Voltage (Over 600 Volts): General .308(a) Grounding .304(f)(7) Guarding .303(h)(2) Workspace .303(h)(3), (h)(4) Hoists .306(b) Identification of Disconnecting Means and Circuits .303(f) Ignition Sources .107(c)(4), (6) Industrial Plants .106(e)(7) Installation and Use of Equipments .303(b)(2) Irrigation Machines .306(i) Lamps .305(j)(1) Liquefied Hydrogen Systems .103(c)(1)(ix) Liquefied Petroleum Systems .110(b)(17), (18), (h)(13) Marking .303(e) Motors .305(j)(4) Moving Walks .306(c) Outline Lighting .306(a) Outside Conductors .304(c) Overcurrent Protection .304(e) Panelboards .305(d) Portable Cables .305(h) Powder Coatings .107(l)(1) Power-Limited Circuits .308(c) Processing Plants .106(h)(7)(iii) Receptacles .305(j)(2) Remote Control Circuits .308(c) Services .304(d) Service Stations .106(g)(5) Signaling Circuits .308(c) Signs .306(a) Splices .303(c) Spraying Operations .107(c)(4), (6), (i)(1)-(5) Storage Batteries .305(j)(7) Storage Rooms .106(d)(4)(iii) Swimming Pools .306(j) Switchboards .305(d) Switches .305(c) Transformers .305(j)(5) Type F Powered Platforms .66(c)(22) Type T Powered Platforms .66(d)(6) Welders .306(d) Wiring Design and Protection .304 Wiring Methods .305(a) Work practices, safety-related .331-.335 Working Space about Electric Equipment .303(g)(1), (h)(3), (h)(4) X-Ray Equipment .306(f) Electrical Installations .301-.399 Electrical Protective Equipment .137, .268(f) Design .137(a) Care and use, in-service .137(b) Electrical safety-related work practices .331-.335 Confined spaces .333(c)(5) Illumination .333(c)(4) Ladders, portable .333(c)(7) Lockout and tags .333(b), .335(b)(1) Personal protective equipment .333(c)(2), .335(a) Portable electric equipment .334(a) Power lines, overhead .333(c)(3) Training .332 Electromagnetic Radiation: Definitions .97(a)(1) Nonionizing Radiation .97(a) Protection Guide .97(a)(2) Warning Symbol .97(a)(3) Electrostatic Apparatus: (see also Electrostatic Apparatus, Fixed; Electrostatic Hand Spraying Equipment) Powder Coatings .107(l)(5)-(7) Electrostatic Apparatus, Fixed .107(h) Powder Coatings .107(l)(5) Spraying: Conformance .107(h)(1) Conveyors .107(h)(7) Fail-Safe Controls .107(h)(9) Fire Protection .107(h)(12) Grounding .107(h)(5) Guarding .107(h)(10) Insulators .107(h)(5) Location .107(h)(3) Safe Distances .107(h)(6) Supports .107(h)(4) Ventilation .107(h)(11) Electrostatic Hand Spraying Equipment .107(i) Application .107(i)(1) Approval .107(i)(3) Conformance .107(i)(2) Electrical Support Equipment .107(i)(4) Grounding .107(i)(5)-(7) Interlocks .107(i)(8) Powder Coatings .107(l)(6) Specifications .107(i)(3), (4) Spray Gun Grounding .107(i)(5) Ventilation .107(i)(9) Elevating Work Platforms: (see Vehicle-Mounted WorkPlatforms) .67 Emergency Action Plan .38(a) Hazardous waste operations and emergency response, exemption .120(l)(1)(ii) Highly hazardous chemicals, process safety management .119(n) Emergency Lighting .261(b)(2) Employee Alarm Systems .165 Installation and Restoration .165(c) Maintenance and Testing .165(d) Manual Operation .165(e) Employee-Owned Protective Equipment .132(b) Employee Protection: (see also Personal Protective Equipment) Egress .36(c) Engine Room Guardrails .219(k)(2) Environmental Controls: Accident Prevention Signs and Tags .145 Air Contaminants .93 Asbestos .93a Effective Dates .98, .149 Labor Camps .142 Marking Physical Hazards .144 Noise Exposure .95 Physical Hazards Markings .144 Radiation: Ionizing .96 Nonionizing .97 Safety Color Codes .144 Sanitation .141 Signs and Tags .145 Standards Sources .99, .150 Ventilation .94 Emergency Response, Hazardous Waste .120 Equalizers, Crane Hoists .179(h)(3) Ethylene Oxide .1047 Ethyleneimine .1003 Area requirements .1003(c) Closed system operation .1003(c)(2) Isolated systems .1003(c)(1) Maintenance and decontamination activities .1003(c)(5) Open-vessel system operations .1003(c)(3) Transfer from a closed operation .1003(c)(4) Medical surveillance .1003(g) Examinations .1003(g)(1) Records .1003(g)(2) Regulated area requirements .1003(d) Contamination control .1003(d)(4) Emergencies .1003(d)(2) Hygiene facilities and practices .1003(d)(3) Reports .1003(f) Incidents .1003(f)(2) Operations .1003(f)(1) Signs, information, and training .1003(e) Container contents identification .1003(e)(2) Lettering .1003(e)(3) Prohibited statements .1003(e)(4) Signs .1003(e)(1) Training and indoctrination .1003(e)(5) Evacuation, Ionizing Radiation .96(f) Exhaust Air Filters, Spray Booths .107(b)(5) Exhaust Systems: (see also Ventilation) Abrasive Blasting .94(a)(4) Grinding, Polishing, Buffing .94(b)(4) Sawmills .265(c)(20) Exhausts, Spraying Operations .107(d) (3), (7), (9) Exits: (see also Access, Egress) Access .37(f) Arrangement .37(e) Capacity .37(c), (d) Components .37(a) Discharge From .37(h) Elevation Change .37(j) Headroom .37(i) Illumination .37(q) Maintenance .37(k) Manlifts .68(b)(8) Markings .37(q) Protective Enclosures .37(b) Explosive-Actuated Fastening Tools .243(d) Definitions .241(a) Fasteners .243(d)(3) High-Velocity Tools .243(d)(2)(i) Inspection .243(d)(2) Loads .243(d)(3) Low-Velocity Tools .243(d)(2)(ii) Maintenance .243(d)(2) Explosive character of furnishings and decorations; occupancy use .37(l) Explosives and Blasting Agents .109 Blast Holes .109(e)(3) Bulk Delivery .109(h)(4) Charge Initiation .109(e)(4) Warning .109(e)(5) Chemicals, highly hazardous, process safety management .119 Effective Dates .114 Hours of Transfer .109(f)(5) Loading .109(e)(3) Magazines .109(c)(2) Mixing Vehicles .109(h)(4) Piers .109(f) Pulpwood Logging .266(c)(7) Railroad Cars and Stations .109(f) Slurries .109(h) Small Arms Ammunition .109(j) Smoking .109(e)(1) Standards Sources .115 Storage .109(c), (f)(4) Transportation .109(d) Use .109(e) Vessels .109(f) Water Gels .109(h) Exposure: Air Contaminants .1000 Airborne Radioactive Material .96(c) Asbestos .1001(b) Asbestos Fibers .1001(b) Limits (Tables G-1 to G-3) .1000 Mineral Dusts .1000 Minors .96(b)(3), (c)(2), (d)(2)(ii) Noise .95 Radiation Exposure .96(b) Extension Ladders, Portable: Metal .26(a)(2) Metal, Trestle .26(a)(4) Wood .25 Wood, Trestle .25(c)(3)(v) Extension Lamps, Cranes .179(g)(7) Extractors .262(y) Eye and Face Protection .133 Markings .133(a)(4) Optical Corrections .133(a)(3) Protectors .133(a)(2) Welding .252(b)(2) Face Protection: (see also Eye and Face Protection; Personal Protective Equipment) .133 Facilities, Labor Camps: (see Labor Camps, Temporary) Fail-Safe Controls, Spraying .107(h)(9) Overhead and Gantry Cranes .179(a)(40), (g)(3)(viii) Fan-Rotating Element .107(d)(4) Farm Vehicles, Anhydrous Ammonia .111(g), (h) Fasteners .243(d)(3) Fastening Tools .243(d) Fibers, Asbestos .1001(b) Filling Densities, Liquefied Petroleum Gases .110(b)(12) Filters, Spraying .107(b)(5) Fire Alarms: (see also Fire Protection) Egress .37(n) Fire Brigades .156 Fire Fighting Equipment .156(d) Organization .156(b) Protective Clothing .156(e)(1) Body protection .156(e)(3) Foot and Leg Protection .156(e)(2) Hand Protection .156(e)(4) Head, Eye, Face Protection .156(e)(5) Respiratory Protection .156(f) General Requirements .156(f)(1) Positive-Pressure Breathing Apparatus .156(f)(2) Selection and Distribution .157(d) Training and Education .156(c) Fire Prevention Plan .38(b) Fire Detection Systems .164 Installation and Restoration .164(b) Maintenance and Testing .164(c) Number, Location, Spacing .164(f) Protection of Detectors .164(d) Response Time .164(e) Fire Extinguishers Cranes .179(c)(3), (i)(5), (o)(3) Derricks .180(j)(5) Dip Tanks .125(f)(2)(i) Explosives Transportation .109(d)(2)(ii) Powered working platforms .66(f)(5)(ii)(I) Welding .252(a)(2)(ii) Fire Extinguishers, Portable .157 Exemptions .157(b) General Requirements .157(c) Hydrostatic Testing .157(f) Inspection, Maintenance Testing .157(e) Selection and Distribution .157(d) Training and Education .157(g) Fire Prevention Plan .38(b) Fire Protection: Ammonium Nitrate .109(i)(7) Blasting Agents .109(i)(7) Bulk Plants .106(f)(4)(ix), (8) Chemical Plants .106(i)(5) Definitions .155 Distilleries .106(i)(5) Electrostatic Apparatus .107(h)(12) Explosives .109(i)(7) Flammable Liquids .106(d)(7), (e)(5), (f)(8), (g)(9), (h)(6), (i)(5) Industrial Plants .106(e)(5) Liquified Petroleum Gases .110(d)(14), (f)(7), (h)(14) Local Fire Alarms .163 Processing Plants .106(h)(6) Refineries .106(i)(5) Service Stations .106(g)(9) Spray Booths .107(f) Cleaning .107(f)(3) Conformance .107(f)(1) Extinguishers, Portable .107(f)(4) Valve Access .107(f)(2) Storage Tanks .106(d)(7) Trucks .178 Fire Protection Equipment: Color Identification .144(a)(1) Fire Brigades .156(d) Fire Resistance (Rating): Inside Storage Rooms .106(d)(4)(ii) Storage Cabinets .106(d)(3)(ii) Tank Supports .106(b)(5)(ii) Fire Retardant Paints .37(o) Fire Watch, Welding .252(a)(2)(iii) Fireworks: (see Pytrotechnics) First Aid .262(pp) Eye Flushing .151(c) Labor Camps .142(k) Pulpwood Logging .266(c)(1)(vii) Standards Sources .153 Welding .252(c)(13) Fittings: (see Piping, Fittings and Tubing; Piping, Valves and Fittings) Fixed Extinguishing Systems .160, .161, .162, .163 Dry Chemical Agent Systems .161 Gaseous Agent Systems .162 General Requirements .160(b) Total Flooding Systems .160(c) Water Spray and Foam Systems .163 Fixed Industrial Stairs: (see Stairs, Fixed Industrial) .24 Fixed Ladders: (see Ladders, Fixed) .27 Flammable and Combustible Liquids: Bulk Plants .106(f) Chemical Plants .106(i) Container Marking, color codes .144(a)(1)(ii) Containers .106(d) Dip Tanks .123-.126 Distilleries .106(i) Effective Dates .114 Hazardous communication .1200 Ignition Sources .106(b)(6), (e)(6), (f)(6), (g)(8), (h)(7) Industrial Plants .106(e) Piping, Valves and Fittings .106(c) Pressure Vessels .106(b)(1)(v) Process safety management of highly hazardous chemicals .119 Processing Plants .106(h) Refineries .106(i) Service Stations .106(g) Spray Finishing .107 Storage and Handling .107(e) Conformance .107(e)(1) Containers .107(e)(3), (5) Hoses .107(e)(6) Grounding .107(c)(9), (e)(9) Liquid Heaters .107(e)(7) Liquid Transfer .107(e)(4) Pipes .107(e)(6) Pump Relief .107(e)(8) Quantity .107(e)(2) Safety Relief Devices .107(e)(8) Spraying Containers .107(e)(5) Standards Sources .115 Storage Containers .106(d) Storage Tanks .106(b), (d) Tanks .106(b), (d) Flammable Materials, Trucks Used .178(c)(2) Flanges, Abrasive Wheel Machinery .215(a)(3), (c) Balance .215(c)(3) Blotters .215(c)(1)(v), (c)(6), (d)(5) Diameter Uniformity .215(c)(4) Dimensions .215(c)(8) Driving .215(c)(7) Finish .215(c)(3) General Requirements .215(c)(1) Maintenance .215(c)(9) Recess .215(c)(5) Repairs .215(c)(9) Types .215(c)(1)(iv) Undercut .215(c)(5) Flash Welding Equipment .255(d) Fire Curtains .255(d)(2) Ventilation .255(d)(1) Float Scaffolds .28(u) Flooding, Tank Areas .106(b)(5)(vi) Floor Loading .22(d) Floor Openings (Holes) .23(a) Manlifts .68(b) (5), (7) Flooring: (see also Floor Openings; Floors) Type F Powered Platforms .66(c)(12) Type T Powered Platforms .66 (b)(5)(iii)(d) Floors: Covers, Hinged .23(a)(3)(i) Open-Sided .23(c) Spray Booths .107(b)(3) Flow Coatings .126(b) Fluidized Beds .107(l)(7) Fluorine Compounds, Welding: (see also Air Contaminants) .252(c)(5) Foam Extinguishing Systems, Fixed .163 Food Handling .141(h), .120(m)(4) Foot Pedals, Power Presses .217(b)(4) Foot Protection .136 Footwalks: Cranes .179(d) Forging Hammers .218(a)(3) Foot-Operated Devices .218(b)(2) Gravity .218(e) Air Lifts .218(e)(1) Board Drop Hammers .218(e)(2) Keys .218(b)(1) Power-Driven .218(d) Cylinder Draining .218(d)(3) Pressure Pipes .218(d)(4) Safety Cylinder Heads .218(d)(1) Shutoff Valves .218(d)(2) Forging Machine Area .30(b) Forging Machines: Billet Shears .218(j)(1) Boltheading .218(i)(1) Conveyors .218(j)(3) Definitions .211(e) Effective Dates .220 Grinding .218(j)(5) Hammers .218(a)(3), (b), (d), (e) Inspections .218(a)(2) Lead Use .218(a)(1) Maintenance .218(a)(2) Presses .218(a)(3), (c), (f), (g) Rivet Making .218(i)(2) Saws .218(j)(2) Shot Blast .218(j)(4) Standards Sources .221 Upsetters .218(h) Forging Presses .218(f) Fork Trucks: (see also Powered Industrial Trucks) .178 Formaldehyde .1048 Airborne Concentration .1048(c) Compliance .1048(f) Emergencies .1048(k) Exposure, Permissible .1048(c) Hazard Communication .1048(m) Housekeeping .1048(j) Hygiene Protection .1048(i) Medical Surveillance .1048(l) Monitoring .1048(d) Personal Protective Clothing .1048(h) Recordkeeping .1048(o) Regulated Areas .1048(e) Respiratory protection .1048(g) Training, Employee .1048(n) Fuel-Gas Systems: (see also Oxygen-Fuel Gas Systems) .253 Fuels: (see also Refueling) Handling and Storage .178(f) Furnishings: Egress .37(l) Fusion Apparatus: (see Drying, Curing and Fusion Apparatus) Gantry Cranes: (see also Overhead and Gantry Cranes) .179 Garages, Undercoating Operations .107(k) Garnett Machines .262(f) Gas Cylinder Inspection .101(a) Gaging Devices .110(b)(19) Gas Mask Canisters .134(g) Color Codes .134(g)(6) Labeling .134(g) Gaseous agent extinguishing systems; fixed .162 Scope and Application .162(a) Specific Requirements .162(b) Gaseous Hydrogen Systems: (see Hydrogen) Gasoline Powered Trucks .178(b)(8), (9) Gears .219(f) Gill Boxes .262(k) Gin Pole Derricks: (see also Derricks) .181(a)(6) Gloves, Rubber Insulating .137 Glue Spreaders .213(r) Goggles: (see also Eye Protection; Eye and Face Protection) .133 Grain Handling .272 Application .272(b) Continuous flow bulk raw grain dryers .272(o) Contractors .272(h) Emergency action plan .272(d) Emergency escape .272(n) Entry into bins, silos, tanks .272(g) Filter collectors .272(k) Grain stream processing equipment .272(m) Grate openings .272(j) Hot work permit .272(f) Housekeeping .272(i) Inside bucket elevators .272(p) Preventive maintenance .272(l) Training .272(e) Gravity Hammers .218(e) Grinders: (see also Abrasive Wheel) Machinery; Cutoff Wheels .243(c)(3), (4) Grinding, Forging Equipment .218(j)(5) Grinding Machines: Cylindrical .215(b)(4) Flanges .215(a)(3) Surface Grinders .215(b)(5) Swing Frame Grinders .215(b)(6) Top Grinding .215(b)(8) Work Rest .215(a)(4) Grinding, Polishing, and Buffing: Branch Pipes .94(b)(3) Enclosure Design .94(b)(5) Exhaust Systems .94(b)(4) Hoods .94(b)(3), (5) Grinding, Top .215(b)(8) Grounding: Bulk Oxygen Systems .104(b)(7)(iv) Circuits .314 Electrostatic Spraying .107(h)(5), (i)(5)-(7) Flammable and Combustible Liquids .106(e)(6)(ii), (f)(3)(iv) General .304(f) Hand Spraying .107(i)(5)-(7) Ignition Sources .107(c)(9) Liquefied Hydrogen Systems .103(c)(4)(iv) Liquid Transfer .107(e)(9) Methods .314(e) Spray Booths .107(h)(10) Spraying Operations .107(c)(9), (e)(9), (i)(5)-(7) Welding .254(c)(2), (d)(3); .255(b)(9), (c)(6) Woodworking Tools .243(a)(5) Guarding: (see also Term To Which It Applies) .211-.222 Abrasive Wheels, Portable .243(c) Floor Openings (Holes) .23(a) Hatchways .23(a)(3) Ladderways .23(a)(2) Live Parts .303(g)(2), (h)(2) Machinery .211-.222 Mechanical Power Transmission Apparatus .219(m) Clutches .219(k) Friction Drives .219(g) Prime Movers .219(b) Pulleys .219(d) Open-Sided Floors .23(c) Platforms .23(c) Powered Tools, Portable .243 Railings .23(e) Runways .23(c) Skylight .23(a)(4) Spraying Equipment .107(h)(10) Stairways .23(a)(1), (d) Wall Openings (Holes) .23(b) Guardrails: Definitions .21(f)(10) Manlifts .68(b)(8)(i), (10)(iv) Power Transmission Apparatus .219(o)(5) Powered and Working Platforms .66(e)(3), (f)(3)(i)(K), (f)(5)(i)(G), (f)(5)(ii)(K) Removable .23(a)(3) Working Surfaces .22(c) Guardrails, Scaffolds: (see Listing Under Specific Type Scaffold) Guards: (see also Guardrails) Derricks .181(j)(1) Hoisting Ropes .179(e)(5) Manlifts .68(b)(7)-(9) Moving Parts .179(e)(6) Trucks .178(e) Guide Posts .217(d)(4) Gudgeon Pin .181(a)(20) Guy Derricks .181(a)(7) Hammers, Forging: (see Forging Hammers) Hand protection .138 Hand Spraying Equipment: (see Electrostatic Hand Spraying Equipment) Hand Tools .242 Dead-Man Controls .243(a)(2) Pulp and Paper Mills .261(c)(13) Handholds, Manlifts .68(c)(4) Handling: (see also Materials Handling and Storage) Anhydrous Ammonia .111 Compressed Gases .101(b) Liquefied Hydrogen Systems .103(c)(2)(iii) Liquefied Petroleum Gases .110 Liquids .106(h)(4) Service Stations .106(g)(1) Handrails .24(h) Cranes .179(d)(3), (4)(ii) Mobile Ladder Stands .29(f)(4) Hangers .219(p)(4) Hardening Tanks .126(a)(1)(i),(ii) Hatchways Guarding .23(a)(3) Hazard Communication, chemical information, transmittal .1200 Hazard Communication Program .1200(e) Hazard Determination .1200(d) Information and Training .1200(h) Labels and Warnings .1200(f) Material Safety Data Sheets .1200(g) Trade Secrets .1200(i) Hazardous chemicals, occupational exposure to in laboratories (see Chemicals, hazardous) .1450 Hazardous chemicals, highly, process safety management (see Chemicals, etc.) .119 Hazardous energy; control of (see Lockout/tagout) Hazardous Materials: Acetylene .102 Anhydrous Ammonia .111 Blasting Agents .109 Bulk Oxygen Systems .104 Chemicals (see entries under Chemicals, etc.) .119 Combustible Liquids .106 Compressed Gases .101 Dip Tanks .108 Effective Dates .114 Explosives .109 Flammable Liquids .106 Hazardous Wastes .120 Hydrogen .103 Liquefied Petroleum Gases .110 Nitrous Oxide .105 Oxygen .104 Packages, transport vehicles, etc., retention of DOT markings .1201 Spray Finishing .107 Standards Sources .115 Storage and Handling: Anhydrous Ammonia .111 DOT markings, retention .1201 Liquefied Petroleum Gases .110 Trucks Used .178(c)(2) Hazardous Waste Operations: Contractors and Subcontractors .120(b)(1)(iv) Decontamination .120(k), (p)(4) Drums and Containers .120(j) Emergency Response .120(e)(7), (l), (p)(8), (q) Engineering Controls and Personal Protective Equipment .120(g) Illumination .120(m) Information Program .120(b)(i) Laboratory Waste Packs .120(j)(6) Material Handling .120(j) Medical Surveillance .120(f), (p)(3), (q)(9) Monitoring .120(c)(6), (h) Post-emergency Response .120(l)(5) Radioactive Wastes .120(j)(4) Recordkeeping .120(f)(7) RCRA Facilities .120(p) Safety and Health Program .120(b) Sanitation .120(n) Site Characterization and Analysis .120(c) Site Control .120(d) Training .120(e), (p)(8)(iii), (q)(6) Shock-sensitive Wastes .120(j)(5) Site Safety and Health Plan .120(b)(4) Tank and Vault Procedures .120(j)(9) Totally-encapsulating Chemical Protective Suits .120(g)(4) Uncontrolled sites, emergency responses .120(l) Head Protection .135 Headroom, Egress .37(i) Healthcare professions and related industries, exposures to bloodborne pathogens .1030 Hearing Conservation Program .95(c) Heating: Dip Tanks .125(g) Bulk Plants .106(f)(2)(ii) Service Stations .106(g)(6) Helicopters .183 Helmets .135, .252(e)(2), .266(c)(iii) Hepatitis B (see also Bloodborne pathogens) .1030 Hinged Floor Covers .23(a)(3)(i) Hoist Limit Switches .179(n)(4) Hoisting Equipment: Cranes .179(e)(5), (h) Powered Platforms .66(f)(4), (g)(6) Rope Guards .179(e)(5) Holding Brakes .179(f)(2) Holes: (see also Floor Openings (Holes); Wall Openings (Holes)) .23 Hooks: Cranes .179(h)(4) Derricks .181(j)(2) Horse Scaffolds .28(m) Hoses Flammable Liquids .107(e)(6) Liquefied Petroleum Gases .110(b)(9) Semiconductors .109(a)(12) Sprinkler Systems .159(c)(5) Standpipe and hose systems .158(c)(3) Welding and Cutting .253(e) Hot Sources .107(c)(3) Hot-work permits, process safety management of highly hazardous chemicals .119(k) Hours of Transfer, Explosives .109(f)(5) Household Stepladders, Type III .25(c)(2)(iv) Housekeeping .141(a)(3) Asbestos .1001(d) Flammable Liquids .106(e)(9) Walking-Working Surfaces .22(a) Hydraulic Barkers .261(e)(14) Hydraulic Equipment .217(b)(11) Hydraulically designed sprinkler systems .159(c)(11) Hydrogen .103 Effective Dates .114 Gaseous Hydrogen Systems .103(a)(2)(i), (b) Clear Zone .103(b)(5)(ii) Containers .103(b)(1)(i) Design .103(b)(1) Equipment Assembly .103(b)(1)(iv) Fittings .103(b)(1)(iii) Inspection .103(b)(5) Location .103(b)(2) Outdoor .103(b)(3)(i) Separate Buildings .103(b)(3)(ii) Operating Instructions .103(b)(4) Piping .103(b)(1)(iii) Safety Relief Devices .103(b)(1)(ii) Testing .103(b)(1)(vi) Tubing .103(b)(1)(iii) Liquefied Hydrogen Systems .103(a)(2)(ii), .103(c) Clear Zone .103(c)(5)(ii) Containers .103(c)(1)(i) Design .103(c)(1) Electrical Systems .103(c)(1)(ix) Equipment Assembly .103(c)(1)(vi) Fittings .103(c)(1)(v) Grounding .103(c)(4)(iv) Inspection .103(c)(5)(i) Location .103(c)(2) Outdoor .103(c)(3)(i) Separate Buildings .103(c)(3)(ii) Special Rooms .103(c)(3)(iii) Maintenance .103(c)(5) Markings .103(c)(1)(iii) Operating Instructions .103(c)(4) Attendants .103(c)(4)(ii) Security .103(c)(4)(iii) Piping .103(c)(1)(v) Safety Relief Devices .103(c)(1)(iv) Supports .103(c)(1)(ii) Testing .103(c)(1)(vii) Tubing .103(c)(1)(v) Vaporizers .103(c)(1)(viii) Standards Sources .115 Hydrostatic Tests: (see also Testing) Fire Extinguishers .157(f) Piping .106(c)(7) Ignition Sources: Bulk Plants .106(f)(6) Dip Tanks .125(e) Industrial Plants .106(e)(6) Powder Coatings .107(l)(1) Processing Plants .106(h)(7) Service Stations .106(g)(8) Spraying Operations .107(c) Combustible Residues .107(c)(5) Conformance .107(c)(1) Electrical Wiring .107(c)(4), (6) Grounding .107(c)(9) Hot Sources .107(c)(3) Lamps .107(c)(7), (8) Separation Minimum .107(c)(2) Storage Tanks .106(b)(6) Illumination: (see Lighting) Indoor Storage: Effective Dates .182 Flammable and Combustible Liquids .106(b)(4), (d)(4), (d)(5), (e)(5), (g)(1)(iii), (h)(4)(i) Rooms .106(d)(4) Standards Sources .183 Industrial Plants: Flammable and Combustible Liquids .106(e) Electrical Systems .106(e)(7) Fire Protection .106(e)(5) Housekeeping .106(e)(9) Incidental Storage .106(e)(2) Ignition Sources .106(e)(6) Maintenance .106(e)(9) Repairs, Equipment .106(e)(8) Tank Loading .106(e)(4) Unit Physical Operations .106(e)(3) Liquefied Petroleum .110(d)(12), (f)(4) Industrial Stepladders, Type I .25(c)(2)(ii) Insect Control .141(a)(5) Labor Camps .142(j) Inspection: (see also Term To Which It Applies) Compressed Gas Cylinders .101(a), .166 Cranes .179(j), .180(d) Crawler .180(d) Gantry .179(j) Ropes .179(m) Locomotive .180(d) Overhead .179(j) Ropes .179(m) Truck .180(d) Cylinders .101(a) Derricks .181(d) Fire Extinguishers .157(e) Flooding, Tank Areas .106(b)(5)(vi), (v) Gas Cylinders .101(a) Gaseous Hydrogen .103(b)(5) Liquefied Hydrogen .103(c)(5)(i) Liquid Oxygen .104(b)(10)(i) Manlifts .68(e) Open Surface Tanks .94(d)(11) Power Presses .217(e) Powered Platforms .66(g) Respirators .134(f) Ropes, Cranes .179(m) Woodworking Machines .213(s) Instruction Signs, Manlifts .68(c)(7) Insulators .107(h)(5) Interior Hung Scaffolds .28(p) Ionizing Radiation .1096 AEC Licensees .1096(p) Airborne Radioactive Materials .1096(c) Caution Signs and Labels .1096(e) Employees: Disclosure .1096(o) Exposure Records .1096(m), (n) Incident Reporting .1096(l) Instruction Posting .1096(i) Evacuation .1096(f) Exemptions .1096(g), (h) Exposure .1096(b) Airborne Radioactive Materials .1096(c) Minors .1096(b)(3), (c)(2), (d)(2)(ii) Exposure Records .1096(m)-(o) Incident Reporting .1096(l) Monitoring .1096(d) Overexposure Reports .1096(m) Personnel Instructions, Posting .1096(i) Radioactive Materials: Packaged .1096(h) Storage .1096(j) Warning Signals .1096(f) Waste Disposal .1096(k) Jacks: Definitions .241(d) Fixed Truck .178(k)(3) Loading .244(a)(1) Marking .244(a)(1) Maintenance .244(a)(2) Truck .178(k)(3) Jointers .213(j) Blades .213(s)(12) Keys, Projecting .219(h) Kiers .262(q) Kilns .265(f) Kitchens, Labor Camps .142(i) Labeling, Hazardous Chemicals .1200 Labor Camps, Temporary .142 Bathing Facilities .142(f) Bedding .142(b)(3) Communicable Diseases Reportings .142(i) Dining Facilities .142(j) Effective Dates .149 Facilities .142(b) First Aid .142(k) Furnishings .142(b) Floors .142(b)(4), (5) Grounds .142(a)(3) Heating Equipment .142(b)(11) Insect Control .142(j) Kitchens .142(i) Laundry Facilities .142(f) Lighting .142(g) Refuse Disposal .142(h) Rodent Control .142(j) Screening .142(b)(8) Sewage Disposal .142(e) Shelters .142(b) Site .142(a) Size .142(a)(2) Sleeping .142(b)(2), (3) Space .142(b)(2), (9) Standards Sources .150 Stoves .142(b)(10) Toilet Facilities .142(d) Washing .142(f) Waste Disposal .142(h) Water Supply .142(c) Windows .142(b)(7), (8) Laboratories, occuptional exposures to hazardous chemicals in (see Chemicals, hazardous) .1450 Laboratories and production facilities, HIV and HBVresearch .1030(e) Ladder-Jack Scaffolds .28(q) Ladder Stands, Manual Mobile; (see Work Platforms, Mobile) .29(f) Ladders: Cranes .179(d)(4), (o)(1) Fixed .27 Manlifts .68(b)(12) Portable Metal .26 Portable Wood .25 Sawmills .265(c)(10) Ladders, Fixed .27 Cages .27(c)(3), (d)(1) Clearances .27(c) Cleats .27(b)(1) Design .27(a) Stresses .27(a)(2) Deterioration .27(b)(7) Electrolytic Action .27(b)(5) Extensions .27(d)(3) Fastenings .27(b)(3) Grab Bars .27(c)(5), (d)(4) Ladder Extensions .27(d)(3) Landing Platforms .27(d)(2) Maintenance .27(f) Pitch .27(e) Rungs .27(b)(1) Safety Devices .27(d)(5) Side Rails .27(b)(2) Splices .27(b)(4) Standards Sources .31 Welding .27(b)(6) Wells .27(d)(1) Ladders, Portable Metal .26 Care .26(c)(2) Electrical safety-related work practices .333(c)(7) Extension Ladders .26(a)(2), (4) General Requirements .26(a)(1) Platform Ladders .26(a)(5) Standards Sources .31 Stepladders .26(a)(3) Straight Ladders .26(a)(2), (4) Use .26(c)(3) Ladders, Portable Wood .25 Care .25(d)(1) Rung Ladders .25(c)(3) Sectional .25(c)(3)(iv) Single .25(c)(3)(ii) Trestle .25(c)(3)(v) Two-Section .25(c)(3)(iii) Side-Rolling Ladders .25(c)(5) Special Purpose Ladders .25(c)(4) Masons’ .25(c)(4)(iii) Painters’ .25(c)(4)(ii) Standards Sources .31 Stepladders .25(c)(2) Trolley Ladders .25(c)(5) Materials .25(b) Use .25(d)(2) Ladderway Guarding .23(a)(2) Lamps: (see also Lighting) .107(c)(7)(8); .305(j)(1) Landings, Manlifts .68(b) (6), (10) Lathers' Scaffolds: (see also Plasterers' Scaffolds) .28(o) Lathes .213(o) Laundry Facilities, Labor Camps .142(f) Laundry Operations .264 Miscellaneous Equipment .264(c)(4) Operating Rules .264(d) Markers .264(d)(1)(iii) Mechanical Safeguards .264(d)(2) Point-of-Operation Guards .264(c) Washroom Machines .264(c)(1) Lavatories .141(d)(2) Lawn Mowers, Power .243(e) Definitions .241(c) Forging Machines .218(a)(1) General Requirements .243(e)(1) Riding Rotary .243(e)(2), (4) Walk-Behind .243(e)(2), (3) Lead .1025, .252(f)(7) Compliance .1025(e) Confined Spaces .252(f)(7)(i), (iii) Housekeeping .1025(h) Hygiene Facilities and Practices .1025(i) Indoors .252(c)(7)(ii), (iii) Medical Removal .1025(k) Medical Surveillance .1025(j) Monitoring .1025(d) Monitoring, Observation of .1025(o) Protective Equipment and .1025(g) Clothing .1025(g) Recordkeeping .1025(n) Respiratory Protection .1025(f) Signs .1025(m) Training, Employee .1025(l) Ventilation .252(c)(7)(iii) Leakage, Bulk Oxygen Systems .104(b)(2)(iii) Levers, Hand-Operated .217(b)(5) Lifelines: (see also Safety Belts) Confined Spaces .252(b)(4)(iv) Crawling Boards .28(t)(2) Powered Platforms .66(d)(9), App. C Welding .252(b)(4)(iv) Chicken Ladders .28(t)(2) Lighting: (see also Lamps) Container Areas .110(d)(16) Cranes .179(c)(4), (g)(7) Electric Equipment, Workspace About .303(g)(1)(v), (h)(3)(ii) Electrical safety-related work practices .333(c)(4) Exits and Exit Signs .37(q) Hazardous Waste Operations .120(m) Labor Camps .142(g) Machinery, Basement Areas .219(c)(5) Manlifts .68(b)(6)(iii), (14) Operating Areas, Industrial Trucks .178(h) Pulp and Paper Mills .261(b)(2), (c)(10), (k)(21) Pulpwood Harvesting .266(e)(15) Sawmills .265(c)(5)(iii), (9), (23)(iii) Spray Booths .107(b)(10) Storage Areas .177(f)(1), .178(h) Lighting Receptacles: Cranes .179(g)(7) Liquefied Hydrogen Systems: (see Hydrogen) Liquefied, Petroleum Gases: (see also Containers, Liquefied Petroleum Gases) .110, .168(b)(3)(x) Appliances .110(b)(20) Attendant .110(b)(14) Buildings: Engines Use .110(e)(11), (12) Industrial Trucks .110(e)(13) Inside Storage .110(f) Piping Into .110(b)(13) Condensed Gas Drips .110(d)(9) Definitions .110(a) Effective Dates .110(b)(19)(i), .114 Electrical Equipment .110(b)(17), (18); (h)(13) Engines in Buildings .110(e)(11), (12) Equipment Approval .110(b)(2) Fire Protection .110(d)(14), (f)(7), (h)(14) Fuel Handling and Storage .178(f) Gaging Devices .110(b)(19) Garaging Vehicles .110(e)(14) Handling .110 Liquid Level Gaging Device .110(b)(19) Liquid Transfer .110(b)(14) Loading .110(b)(15) Motor Fuel .110(e) Odorizing Gases .110(b)(1) Pits and Drains .110(d)(11) Regulating Equipment .110(b)(6); (c)(5); (d)(9); (e)(9) Indoor .110(c)(5) Location .110(b)(6) Outdoor .110(c)(4) Service Stations .110(h) Standards Sources .115 Storage .110 Tank Car Loading .110(b)(15) Transport Trucks .110(b)(15) Trucks .178(b)(10), (11) Trucks Conversion .178(d), (q)(12) Liquid Fuels: Handling and Storage .178(f) Service Stations .106(g) Liquid Heaters, Spray .107(e)(7) Liquid Transfer: Anhydrous Ammonia .111(b)(12), (f)(6) Flammable Liquids .106(e)(2)(iv), (e)(3)(vi), (f)(3)(vi), (g), (h)(4), .107(e)(4), (9) Liquefied Petroleum Gases .110(b)(14) Load Handling: Crawler, Locomotive and Truck Cranes .180(h) Attaching .180(h)(2) Holding .180(h)(4) Moving .180(h)(3) Size .180(h)(1) Derricks .181 Attaching .181(i)(2) Boom Securing .181(i)(6) Holding .181(i)(4) Moving .181(i)(3) Size .181(i)(1) Winch Heads .181(i)(5) Overhead and Gantry Cranes .179(n) Attaching .179(n)(2) Hoist Limit Switches .179(n)(4) Moving .179(n)(3) Size .179(n)(1) Load Ratings: Cranes .180(c) Derricks .181(c) Overhead and Gantry Cranes .179(b)(5) Powered Platforms .66(c)(7) Loading: Bulk Plants .106(f)(3) Explosives .109(e)(3) Industrial Plants .106(e)(4) Liquefied Petroleum Gases .110(b)(15) Processing Plants .106(h)(5) Scaffolds .29(a)(2) Lockout/tagout of hazardous energy .147 Control sequence .147(d) Electrical safety-related work practices .333(b) Inspection .147(c)(6) Powered platforms .66(f)(3)()i)(J) Release procedures .147(e) Testing .147(f)(1) Training .147(c)(7) Locomotive Cranes: (see also Crawler, Locomotive and TruckCranes) .180 Log Handling: (see also Sawmills) .265(d) Longshoring .16(a) Looms .262(n) Low Pressure Tanks .106(b)(1)(iv) LP-Gases: (see Liquefied Petroleum Gases) Lumber Handling .265(c)(27), (28) Lunchrooms .141(g) Location .141(g)(1), (2) Waste Disposal Containers .141(g)(3) Machine Guarding: (see Machine(ry) Guarding) Machine(ry) Guarding .211-.222 Abrasive Wheel Machinery .215 Anchoring Fixed Machinery .212(a), (b) Bakeries .263(c) Barrels .212(a)(4) Blades Exposure .212(a)(5) Calendars .216 Containers .212(a)(4) Definitions .211 Drums .212(a)(4) Effective Dates .220 Forging Machines .218 Mills .216 Point of Operation .212(a)(3) Power Presses .217 Power Transmission Equipment .219 Standards Sources .221 Types .212(a)(1) Woodworking Machinery .213 Machines: Abrasive Wheels .215 Definitions .211 Forging .218 Laundry .264 Mills and Calenders .216 Power Transmission, Mechanical .219 Presses, Mechanical .217 Textiles .262 Woodworking .213 Magazines, Explosives .109(c)(2) Class I .109(c)(3) Class II .109(c)(4) Class III .109(c)(5) Maintenance: (see also Term To Which It Applies) Bulk Oxygen Systems .104(b)(10) Cranes .179(l), .180(f) Derricks .181(f) Egress .36(d), .37(k) Fire Alarm Systems .163(c) Fire Extinguishers: .157(e) Gaseous Hydrogen Systems .103(b)(5) Industrial Plants .106(e)(9) Liquefied Hydrogen Systems .103(c)(5) Powder Coatings .107(l)(4) Powered Industrial Trucks .178(q) Powered Platforms .66(e)(6) Processing Plants .106(h)(8) Respirators .134(f) Standpipe and Hose System .158(e) Sprinkler Systems .159(c)(2) Type F Powered Platforms .66(c)(5) Manifolding Gas Cylinders .253(c) Fuel-Gas .253(c)(1) Operating Procedures .253(c)(5) Oxygen .253(c)(2), (3) Portable Outlet Headers .253(c)(4) Manholes .23(a)(6), .268(o) Manlifts .68 Belts .68(c)(1)(ii) Brakes .68(c)(1)(i) Clearances .68(b)(11) Design .68(b)(3) Exit Protection .68(b)(8) Floor Openings .68(b)(5), (7) Guardrails .68(b)(8)(i), (10)(iv) Guards .68(b)(7), (9) Handholds .68(c)(4) Inspections .68(e) Instruction Signs .68(c)(7) Ladders .68(b)(12) Landings .68(b)(6) Lighting .68(b)(6)(iii), (14) Machinery .68(c) Mechanical Requirements .68(c) Operating Rules .68(d) Platforms .68(c)(3) Speed .68(c)(2) Standards Sources .68(b)(4), .69 Steps .68(c)(3) Stops .68(c)(5), (6) Warning Signs .68(c)(7) Weather Protection .68(b)(15) Marine Service Stations .106(g)(4) Marine Terminals .16(b) Marking Physical Hazards .144 Sawmills .265(c)(11) Markings: (see also Signs and Tags) Bulk Oxygen Systems .104(b)(8)(viii) Compressed Gas Cylinders .253(b)(1) Electric equipment: General .303(e) Hazardous locations .307(b)(2)(ii) Explosive Actuated Tools .243(d)(3) Explosives .109(d)(2)(ii) Eye and Face Protection .133(a)(4) Gaseous Hydrogen Systems .103(b)(1)(v) Hazardous materials, retention of DOT markings .1201 Liquefied Hydrogen Systems .103(c)(1)(iii) Liquefied Petroleum Gases .110(b)(5), (c) Load Ratings: Cranes .180(c)(2) Derricks .181(c) Powered Industrial Trucks .178(a)(3) Powered Platforms .66(f)(7) Physical Hazards .144 Respirators .134(g) Sawmills .265(c)(11) Mason's Adjustable Multiple Point Suspension Scaffolds .28(f) Masons’ Ladders .25(c)(4)(iii) Matching Machines .213(n) Material Safety Data Sheets, chemical hazards information .1200 Materials Handling and Storage: Aisles and Passageways .176(a) Clearance Signs .176(e) Cranes—Crawler, Locomotive and Truck .180 Cranes, Overhead and Gantry .179 Derricks .181 Effective Dates .182 Guarding Openings .176(g) Hazardous materials, retention of DOT markings .1201 Hazardous Waste Operations .120(j), (p)(6) Housekeeping .176(c) Mechanical Equipment .176(a) Powered Industrial Trucks .178 Pulp and Paper Mills .261(c), (d), (m) Railroad Car Blocks .176(f) Securing .176(b) Standards Sources .183 Maximum Allowable Concentration: Fluorine .252(c)(5)(ii) Welding Contamination .252(c)(1)(iii) Means of Egress: (see Egress Means) Mechanical Handling Equipment: Clearances .176(a) Powered Industrial Trucks .177(e), .178 Mechanical Power Presses: Air Controlling Equipment .217(b)(10) Brakes, Friction .217(b)(2) Clearances, Work Area .217(f)(3) Clutches: Full Revolution .217(b)(3) Part Revolution .217(b)(7) Definitions .211(d) Dies .217(d) Effective Dates .220 Electrical Controls .217(b)(8) Excluded Machines .217(a)(5) Foot Pedals .217(b)(4) Guarding .217(b) Guide Posts .217(d)(4) Hand Feeding Tools .217(c)(4) Hazards: Guide Posts .217(d)(4) Personnel .217(b)(1) Hydraulic Equipment .217(b)(11) Inspection, Records .217(e)(1) Instructions .217(f)(2) Lever, Hand-Operated .217(b)(5) Maintenance: Records .217(e)(1) Training Personnel .217(e)(3) Modifications .217(a)(4), (e)(2) Operating Instructions .217(f)(2) Overloading .217(f)(4) Point of Operation .217(c) Pressure Vessels .217(b)(12) Slide Counterbalances .217(b)(9) Air .217(b)(9)(iii)-(v) Spring .217(b)(9)(i), (ii) Standards Sources .221 Training Maintenance Personnel .217(e)(3) Treadles .217(b)(4) Trips, Two-Hand .217(b)(6) Unitized Tooling .217(d)(5) Mechanical Power Transmission Apparatus .219 Bearings .219(j), (p)(3) Belts: Care .219(p)(6) Fasteners .219(l)(4) Perches .219(l)(3) Shifters .219(l)(1) Shippers .219(l)(2) Chains .219(f) Clutches .219(k), (l) Collars .219(i) Couplings .219(i), (k)(1) Cutoff Couplings .219(k)(1) Definitions .211(f) Drives: Belt, Rope, and Chain .219(e) Friction .219(g) Effective Dates .220 Engine Rooms .219(k)(2) Equipment Care .219(p) Excluded Apparatus .219(a)(1) Gears .219(f) Guarding .219 Guards: Disks .219(m)(1) Horizontal Overhead: Belts .219(o)(3) Rope and Chain Drives .219(o)(4) Materials .219(m)(1), (o) Prime Mover .219(b) Shields .219(m)(2) Standard .219(m) Manufacturing Methods .219(m)(2) Materials .219(m)(1) Toeboards .219(o)(5) U-Guards .219(m)(3) Wooden .219(o)(2) Hangers .219(p)(4) Keys .219(h) Located in Basements, Towers, and Rooms .219(c)(5) Personnel Protection .219(p)(7) Prime Mover Guards: Connecting Rods .219(b)(2) Cranks .219(b)(2) Extension Piston Rods .219(b)(3) Flywheels .219(b)(1) Tail Rods .219(b)(3) Projections .219(h) Pulleys .219(d), (k), (p)(5) Setscrews .219(h) Shafting .219(c) Care .219(p)(2) Guarding .219(c)(2), (3) Installation .219(c)(1) Projecting Shafts .219(c)(4) Sprockets .219(f) Standards Sources .221 Textile Industry .219(a)(3) Medical Services: (see also First Aid Personnel Protective Equipment) .151 Asbestos .1001(j) First Aid .151 Labor Camps .142(k) Pulpwood Logging .266(c)(1) Textiles .262(pp) Welding .252(c)(13) Labor Camps .142(k) Radiation Exposure Records .96(n) Standards Sources .153 Medical Surveillance .120(b)(5), (f) Mercantile Occupancies .106(d)(5)(iv) Mercury .252(f)(10) Exposure Limit .95(b) Metal Cutting: (see Cutting and Welding) Metal Ladders, Portable: (see also Ladders, Portable Metal) .26 Methyl chloromethyl ether .1003 Area requirements .1003(c) Closed system operation .1003(c)(2) Isolated systems .1003(c)(1) Maintenance and decontamination activities .1003(c)(5) Open-vessel system operations .1003(c)(3) Transfer from a closed operation .1003(c)(4) Medical surveillance .1003(g) Examinations .1003(g)(1) Records .1003(g)(2) Regulated area requirements .1003(d) Contamination control .1003(d)(4) Emergencies .1003(d)(2) Hygiene facilities and practices .1003(d)(3) Reports .1003(f) Incidents .1003(f)(2) Operations .1003(f)(1) Signs, information, and training .1003(e) Container contents identification .1003(e)(2) Lettering .1003(e)(3) Prohibited statements .1003(e)(4) Signs .1003(e)(1) Training and indoctrination .1003(e)(5) Methylene Chloride: Permissible Exposure Limits .1052(c) Exposure Monitoring .1052(d) Regulated Areas .1052(e) Methods of Compliance .1052(f) Respiratory Protection .1052(g) Protective Work Clothing and Equipment .1052(h) Hygiene Facilities .1052(i) Medical Surveillance .1052(j) Hazard Communications .1052(k) Employee Information and Training .1052(l) Recordkeeping .1052(m) 4,4-Methylenedianiline: Airborne Concentration .1050(c) Compliance .1050(g) Emergency Situations .1050(d) Hazard Communication .1050(k) Exposure, Permissible .1050(c) Housekeeping .1050(l) Hygiene Facilities and Practices .1050(j) Medical Surveillance .1050(m) Monitoring .1050(e) Personal Protective Equipment .1050(i) Clothing .1050(i) Recordkeeping .1050(n) Regulated Areas .1050(f) Respiratory protection .1050(h) Mill Roll Heights .216(a)(4) Mills, Pulp, Paper and Paperboard (see also Pulp, Paper and Paperboard Mills) .261 Mills, Rubber and Plastics Industry: Definitions .211(c) Location Protection .216(d)(1) Roll Heights .216(a)(4) Safety Controls .216(b) Auxiliary Equipment .216(b)(3) Safety Trip Control .216(b)(1) Stopping Limits .216(f)(1), (2) Switches, Trip and Emergency .216(e) Minors: Ionizing Radiation Exposure .96(b)(3), (c)(2), (d)(2)(ii) Minors Employment .217(f)(4) Mixing: Blasting Agents .109(g)(2), (3); (h)(3), (4) Explosives .109(h)(3), (4) Molding Machines .213(n) Monitoring: Asbestos .1001(f) Ionizing Radiation .96(d) Mortising Machines .213(e) Motor Fuels .110(e) Motor Vehicles: Anhydrous Ammonia .111(f) Motorized Hand Trucks: (see also Powered Industrial Trucks) .178 Multi-piece Rim Wheels .177 alpha-Napthylamine .1003 Area requirements .1003(c) Closed system operation .1003(c)(2) Contamination control .1003(d)(4) Emergencies .1003(d)(2) General regulated area requirements .1003(d) Hygiene facilities and practices .1003(d)(3) Isolated systems .1003(c)(1) Maintenance and decontamination activities .1003(c)(5) Open-vessel system operations .1003(c)(3) Transfer from a closed operation .1003(c)(4) Medical surveillance .1003(g) Examinations .1003(g)(1) Records .1003(g)(2) Regulated area requirements .1003(d) Contamination control .1003(d)(4) Emergencies .1003(d)(2) Hygiene facilities and practices .1003(d)(3) Reports .1003(f) Incidents .1003(f)(2) Operations .1003(f)(1) Signs, information, and training .1003(e) Container contents identification .1003(e)(2) Lettering .1003(e)(3) Prohibited statements .1003(e)(4) Signs .1003(e)(1) Training and indoctrination .1003(e)(5) beta-Napthylamine .1003 Area requirements .1003(c) Contamination control .1003(d)(4) Closed system operation .1003(c)(2) Emergencies .1003(d)(2) General regulated area requirements .1003(d) Hygiene facilities and practices .1003(d)(3) Isolated systems .1003(c)(1) Maintenance and decontamination activities .1003(c)(5) Open-vessel system operations .1003(c)(3) Transfer from a closed operation .1003(c)(4) Medical surveillance .1003(g) Examinations .1003(g)(1) Records .1003(g)(2) Regulated area requirements .1003(d) Contamination control .1003(d)(4) Emergencies .1003(d)(2) Hygiene facilities and practices .1003(d)(3) Reports .1003(f) Incidents .1003(f)(2) Operations .1003(f)(1) Signs, information, and training .1003(e) Container contents identification .1003(e)(2) Lettering .1003(e)(3) Prohibited statements .1003(e)(4) Signs .1003(e)(1) Training and indoctrination .1003(e)(5) Needle Beam Scaffolds .28(n) 4-Nitrobiphenyl .1003 Area requirements .1003(c) Closed system operation .1003(c)(2) Isolated systems .1003(c)(1) Maintenance and decontamination activities .1003(c)(5) Open-vessel system operations .1003(c)(3) Transfer from a closed operation .1003(c)(4) Medical surveillance .1003(g) Examinations .1003(g)(1) Records .1003(g)(2) Regulated area requirements .1003(d) Contamination control .1003(d)(4) Emergencies .1003(d)(2) Hygiene facilities and practices .1003(d)(3) Reports .1003(f) Incidents .1003(f)(2) Operations .1003(f)(1) Signs, information, and training .1003(e) Container contents identification .1003(e)(2) Lettering .1003(e)(3) Prohibited statements .1003(e)(4) Signs .1003(e)(1) Training and indoctrination .1003(e)(5) N-Nitrosodimethylamine .1003 Area requirements .1003(c) Closed system operation .1003(c)(2) Isolated systems .1003(c)(1) Maintenance and decontamination activities .1003(c)(5) Open-vessel system operations .1003(c)(3) Transfer from a closed operation .1003(c)(4) Medical surveillance .1003(g) Examinations .1003(g)(1) Records .1003(g)(2) Regulated area requirements .1003(d) Contamination control .1003(d)(4) Emergencies .1003(d)(2) Hygiene facilities and practices .1003(d)(3) Reports .1003(f) Incidents .1003(f)(2) Operations .1003(f)(1) Signs, information, and training .1003(e) Container contents identification .1003(e)(2) Lettering .1003(e)(3) Prohibited statements .1003(e)(4) Signs .1003(e)(1) Training and indoctrination .1003(e)(5) Nitrous Oxide .105 Administrative Controls .95(b)(1) Effective Dates .114 Engineering Controls .95(b)(1) Standards Sources .115 Noise Exposure .95 Effective Dates .98 Personal Protective Equipment .95(b)(1), (c), (i), (j) Pulpwood Logging .266(c)(1)(vi) Standards Sources .99 Nonionizing Radiation .97 Effective Dates .98 Electromagnetic Radiation .97(a) Standards Sources .99 Nonpotable Water .120(n)(2) Noxious Gases, Storage Areas .178(i) Nozzles: Abrasive Blasting .94(a)(2)(iii), .244(b) Gasoline .106(g)(3)(vi) Standpipe .158(c)(4) Occupant Load .37(d) Occupational Noise Exposure: (see Noise Exposure) Odorizing Gases .110(b)(1) Open-Sided Floors .23(c) Open Surface Tanks: (see Tanks: Open Surface) Openings: (see also Floor Openings (Holes), Wall Openings (Holes)) .23 Tanks: Inside .106(b)(4)(iv) Organic Peroxide Coatings: (see also Dual Component Coatings) .107(m) Outdoor Storage: Flammable Liquids .106(d)(6) Outlet Headers, welding .253(c)(4) Protective Equipment .253(e)(4) Outrigger Scaffolds .28(e) Outside Storage Trucks .178(c)(2)(ix), (xi) Ovens .263(l) Direct-Fire .263(l)(10) Direct Recirculating .263(l)(11) Electrical Heating Equipment .263(l)(8) General Requirements .263(l)(9) Indirect Recirculating .263(l)(15) Location .263(l)(1) Mechanical Parts .263(l)(3) Overflow Pipes, Dip Tanks .125(b) Overhead Cranes: (see also Overhead and Gantry Cranes) .179 Overhead and Gantry Cranes: Access .179(c)(2) Adjustments .179(l)(3) Brakes .179(f) Bridge Bumpers .179(e)(2) Cabs .179(c) Clearances .179(b)(6) Effective Dates .179(b)(2), .182 Electric Equipment .179(g) Fire Extinguishers .179(c)(3), (o)(3) Footwalks .179(d) Guards .179(e)(5), (6) Handrails .179(d)(3), (4)(ii) Hoisting Equipment .179(h) Hoisting Rope Guards .179(e)(5) Inspections .179(j), (m) Ladders .179(d)(4) Lighting .179(c)(4) Load Handling .179(n) Maintenance .179(l) Modifications .179(b)(3) Moving Part Guards .179(e)(6) Rail Clamps .179(b)(4) Rail Sweeps .179(e)(4) Rated Load: Markings .179(b)(5) Tests .179(k)(2) Repairs .179(l)(3) Rope inspection .179(m) Stairways .179(d)(4) Standards Sources .183 Testing .179(k) Toeboards .179(d)(3) Trolley Bumpers .179(e)(3) Trolley Stops .179(e)(1) Warning Devices .179(i) Wind Indicators .179(b)(4) Overhead Wires: Cranes .180(j)(4) Derricks .181(j)(5)(iv) Overspray Collectors .107(b)(6) Oxygen: (see also Bulk Oxygen Systems) .104 Effective Dates .114 Standards Sources .115 Storage .252(a)(2)(iv) Oxygen-Fuel Gas Systems .253 Outlet Headers .253(c)(4) Piping Systems .253(d) Protective Equipment .253(e) Oxygen Manifolds: High Pressure .253(c)(2) Low Pressure .253(c)(3) Painters’ Stepladders .25(c)(4)(ii) Paints: Color Code .144 Fire Retardant .37(o) Paper and Paperboard Mills: (see also Pulp, Paper and Paperboard Mills) .261 Passageways, Working Surfaces .22(b) Permissible Exposure Limits .1000 Personal Protection: (see also Personal Protective Equipment) .219(p)(7) Personal Protective Equipment: (see also Lifelines, and Other Terms Listed Below) Abrasive Blasting .94(a)(5) Asbestos Exposure .1001(d) Clothing .1001(d)(3) Bloodborne pathogens, exposure to, use of ppe .1030(c)(2)(ii), (d)(2)(i) and (3) Electrical Protective Equipment .137, .268(f) Electrical safety-related work practices, use of ppe .333(c)(2), .335(a) Emergency Showers and Fountains: Pulp, Paper and Paperboard Mills .261(g)(5), (18) Eye Protection .133 Face Protection .133 Fire Brigades .156 Foot Protection .136 General Requirements .132 Hand protection .138 Hazardous Waste Operations .120(g) Head Protection .135 Noise Exposure .95(b)(1) Pulp and Paper Mills .261(g)(2), (i)(4), (k)(3) Pulpwood Logging .266(c)(1)(i)-(v) Respiratory Protection .134 Textiles .262(qq) Welding .252-.257 Booths .252(b)(2)(iii) Cable .252(b)(1)(ii) Clothing .252(b)(3) Eye Protection .252(b)(2) Helmets .252(b)(2) Railing .252(b)(1)(i) Shade Numbers, Lenses .252(b)(2)(ii)(H), (b) Physical Hazards Markings: (see also Color Codes, Physical Hazards: Markings) .144 Effective Dates .149 Standards Sources .150 Piers and Wharves: (see also Wharves) Trucks Used .178(c)(2)(x) Pipes: Dip Tanks .125(b) Flammable Liquids .107(e)(6) Overflow .125(b) Piping: (see Piping, Fittings and Tubing; Piping, Valves and Tubing) Piping, Fittings and Tubing: Anhydrous Ammonia .111(b)(7) Bulk Oxygen Systems .104(b)(5) Gaseous Hydrogen Systems .103(b)(1)(ii), (iii) Liquefied Hydrogen Systems .103(c)(1)(iv), (v) Liquefied Petroleum Gases .110(b)(8) Safety Relief Devices .103(b)(1)(ii), (c)(1)(iv) Piping Systems, Oxygen-Fuel .253(d) Fittings .253(d)(1) Installation .253(d)(3) Painting .253(d)(4) Piping .253(d)(1) Piping Joints .253(d)(2) Pressure Relief Devices .253(e)(2) Protective Equipment .253(e)(3), (4) Signs .253(d)(4) Station Outlets .253(e)(4) Testing .253(d)(5) X-ray Inspections .252(d)(1)(vii) Piping, Valves, and Fittings: Flammable and Combustible Liquids .106(c) Corrosion Protection .106(c)(5) Design .106(c)(1) Joints .106(c)(3) Materials .106(c)(2) Supports .106(c)(4) Testing .106(c)(7) Valves .106(c)(6) Liquefied Petroleum Gases .110(h)(7) Processing Plants .106(h)(4)(ii) Pits .23(a)(5) Drains .110(d)(11) Planing Machines .213(n) Plasterers’ Scaffolds .28(o) Plastics Industry: (see also Mills, Rubber and Plastics Industry) Auxiliary Equipment .216(a)(3) Effective Dates .216(a)(1), (2), .220 Installations: Existing .216(a)(2) New .216(a)(1) Mills and Calenders .216 Standards Sources .221 Platform Lift Trucks: (see also Powered Industrial Trucks) .178 Platforms, Scaffolds: (see also Listings Under Specific Type Scaffold) Guarding .23(c) Manlifts .68(c)(3) Pneumatic Powered Tools .243(b) Airhoses .243(b)(2) Portable .243(b)(1) Point of Operation Guarding .212(a)(3), .217(c) Polishing: (see Grinding, Polishing and Buffing) Portable Fire Extinguishers: (see also Fire Extinguishers, Portable) .157 Portable Metal Ladders: (see also Ladders, Portable Metal) .26 Portable Stepladders: (see Stepladders, Portable) Portable Tank Storage: (see Tank Storage, Portable) Portable Tanks: (see Tanks, Portable) Portable Tools: (see also Powered Tools, Hand and Portable) .244 Portable Welding Machines: (see Welding Machines, Portable) Portable Wood Ladders: (see also Ladders, Portable Wood) .25 Powder Coatings .107(l) Power Presses, Mechanical: (see Mechanical Power Presses) Powered Industrial Trucks: Approval Labels .178(a)(3), (7) Batteries .178(g) Combustible Dusts .178(c)(2)(vi) Conversion .178(d), (q)(12) Design and Construction .178(a)(2) Designated Locations .178(c)(1) Designations, Trucks: D .178(b)(1) DS .178(b)(2) DY .178(b)(3) E .178(b)(4) ES .178(b)(5) EE .178(b)(6) EX .178(b)(7) G .178(b)(8) GS .178(b)(9) LP .178(b)(10) LPS .178(b)(11) Effective Dates .182 Fire Protection .178(a)(1) Front End Attachments .178(a)(5) Fuel Handling .178(f) Gases and Fumes .178(i) Grain Handling .178(c)(2)(vi), (b) Hazardous Materials .178(c)(2) Lighting .178(h) Loading .178(o) Maintenance .178(q) Markings .178(a)(6) Modifications .178(a)(4) Operations .178(p) Repairs .178(q) Safety Guards .178(e) Standards Sources .183 Training Operators .178(l) Traveling .178(n) Truck Operations .178(m) Powered Platforms .66-.70 Access .66(f)(3) (i)(K), (ii)(D), (iii)(C)(2), (f)(5)(ii)(J) Application .66(b) Buildings, affected parts .66(e) Definitions .66(d) Electrical .66(e)(11), (f)(8) Equipment .66(f) Fall Arrest systems 66(f)(5)(ii)(L), (M), (iii)(B), (j), App. C Hoisting Equipment .66(f)(4), (g)(6) Inspections .66(g) Lockout .66(f)(3)(i)(J) Maintenance .66(e)(5), (10), (g), (h) Manlifts .68 Reshackling Hoists .66(h)(4) Ropes .66(f)(7), (g)(5), (h)(3), (4) Standards Sources .69 Tests .66(g) Vehicle-Mounted .67 Powered Tools, Hand and Portable: Abrasive Wheels .243(c) Compressed Air Cleaning .242(b) Definitions .241 Effective Dates .245 Employees .242(a) Explosive Actuated Fastening .243(d) Guarding .243 Lawn Mowers, Power .243(e) Pneumatic Powered .243(b) Standards Sources .246 Woodworking .243(a) Presses: (see also Mechanical Power Presses) Cold Trimming .218(g)(2) Forging .218(f) Hot Trimming .218(g)(2) Hydraulic Forging .218(f)(2) Trimming .218(g) Pressure Gages, Air Receivers .169(b)(3) Pressure Vessels .106(b)(1)(v), .217(b)(12) Chemical Plants .106(i)(3) Distilleries .106(i)(3) Pulp and Paper Mills .216(g)(16), (17) Refineries .106(i)(3) Pressures: (see Safety Relief Devices) Prime Mover Guards .219(b) Primers, Ammunition .109(j)(4) Process safety management of highly hazardous chemicals (see Chemicals, etc.) .119 Processing Plants, Flammable and Combustible Liquids .106(h) Application .106(h)(1) Buildings .106(h)(3) Fire Protection .106(h)(6) Housekeeping .106(h)(8) Ignition Sources .106(h)(7) Liquid Handling .106(h)(4) Loading .106(h)(5) Location .106(h)(2) Maintenance .106(h)(8) Profile Lathes .213(o) Projections .219(h) beta-Propiolactone .1003 Area requirements .1003(c) Closed system operation .1003(c)(2) Isolated systems .1003(c)(1) Maintenance and decontamination activities .1003(c)(5) Open-vessel system operations .1003(c)(3) Transfer from a closed operation .1003(c)(4) Medical surveillance .1003(g) Examinations .1003(g)(1) Records .1003(g)(2) Regulated area requirements .1003(d) Contamination control .1003(d)(4) Emergencies .1003(d)(2) Hygiene facilities and practices .1003(d)(3) Reports .1003(f) Incidents .1003(f)(2) Operations .1003(f)(1) Signs, information, and training .1003(e) Container contents identification .1003(e)(2) Lettering .1003(e)(3) Prohibited statements .1003(e)(4) Signs .1003(e)(1) Training and indoctrination .1003(e)(5) Protective Clothing: (see Clothing, Protective and Personal Protective Equipment) Protective Equipment, Piping: (see also Personal Protective Equipment) .253(e) Hoses and Connections .253(5) Pressure-Reducing Regulations .253(6) Stations Outlet .253(4) Pulleys .219(d), (k), (p)(5) Pulp, Paper and Paperboard Mills: Barking Devices .261(c)(12) Belt Conveyors .261(c)(15) Bleaching .261(h) Bridge or Dock Plates .261(c)(11) Chemical Processes .261(g) Cranes .261(c)(8) Finishing Rooms .261(1) Hand Tools .261(c)(13) Handling .261(c), (d) Lighting .261(b)(2), (c)(10), (k)(21) Lockouts .261(b)(1) Machine Rooms .261(k) Materials Handling .261(m) Mechanical Pulp Processes .261(i) Personal Protective Equipment .261(d)(1) Pulpwood: Preparation .261(e) Removal .261(c)(14) Rags and Old Paper .261(f) Safe Practices .261(b) Signs: Conveyors .261(c)(16) Traffic .261(c)(9) Standards Sources .261(a)(3), (4); .268 Stock Preparation .261(j) Storage .261(c), (d) Chocking Rolls .261(d)(4) Clearances .261(d)(2) Piling .261(d)(3) Traffic Warning Signs .261(c)(9) Pulpwood Logging .266 Chain Saw Operations .266(e)(2) Chipping .266(h)(4) Environmental Conditions .266(d)(5) Explosives .266(d)(10) First Aid .266(d)(2), (i)(7), App. A, App. B Hand and Portable Powered Tools .266(e) Harvesting .266(h) Bucking .266(h)(3) Felling .266(h)(2) Limbing .266(h)(3) Loading .266(h)(6) Machines for Moving Materials .266(f) designated operator .266(f)(2) FOPS/ROPS .266(f)(3) overhead guard .266(f)(4) machine access .266(f)(5) exhaust system .266(f)(6) brakes .266(f)(7) guarding .266(f)(8) Personal Protective Equipment .266(d)(1) Seat Belts .266(d)(3) Storage .266(h)(8) Training .266((i) frequency .266(i)(2) content .266(i)(3) first-aid .266(i)(7) designated trainer .266(i)(8) certification .266(i)(10) meetings .266(i)(11) Vehicles .266(g) maintenance .266(g)(1) inspection .266(g)(2) instructions .266(g)(3) Work Areas .266(d)(6) Pumps, Gasoline: (see also Service Stations) .106(g)(3), (4) Pyrotechnics .109(k), .119 Radial Saws .213(h) Radiation: Ionizing .96 Nonionizing .97 Radioactive Materials: Packaged .96(h) Storage .96(j) Rail Clamps .179(b)(4), .180(i)(1) Rail Sweeps .179(e)(4) Railroad Cars .176, .178(k)(2)-(4) Explosives .109(f) Ramps: Egress .37(j) Rated Load Markings: Cranes .179(b)(5) Derricks .181(c)(2) Rated Load Test: Crawler, Locomotive, and Truck Cranes .180(e)(2) Overhead and Gantry Cranes .179(k)(2) Recordkeeping: Asbestos .1001(i), (j)(6) Bloodborne pathogens, exposure to .1030(f)(6), (h) Building Inspection, assurance for powered platform use .66(c) Communicable Diseases .142(l)(1) and (2) Cranes: Crawler, Locomotive and Truck .180(d)(2) and (6), (e)(2), (g)(i) and (2) Overhead and Gantry .179(k)(2), (m)(1) and (2) Derricks .181(g)(1) and (3) Forging Equipment Inspection .218(a)(2) Hazardous Waste Operations .120(f)(7) Injury Reporting, Welding .252(c)(13) Ionizing Radiation Exposure .96(m), (o) Labor Camps .142(l)(1) and (2) Liquid Storage Tanks, Class I .106(g)(1) Manlifts .68(e)(3) Mechanical Power Presses .217(e)(1) Personal Monitoring: Asbestos .1001(i)(1) Ionizing Radiation .96(n) Power Presses Inspection .217(e)(1) Powered Platforms Inspection .66(g) Radiation Exposure .96(b)(2)(iii), (m)(1), (n), (o)(1) Records, Disclosure, Ionizing Radiation .96(o)(1) Respirators .134(e)(2), (f)(2)(iv) Welding Operations .252(c)(13), .255(e) Records: Asbestos .93a(i), (j)(6) Ionizing Radiation .96(m), (n) Mechanical Power Presses .217(e)(1) Refineries, Chemical Plants and Distilleries .106(i) Application .106(j) Fire Protection .106(i)(5) Pressure Vessels .106(i)(3) Process Unit Location .106(i)(4) Storage Tanks .106(i)(1) Wharves .106(i)(2) Refrigerated Containers: Anhydrous Ammonia .111(d) Refueling: Cranes .180(i)(4) Derricks .181(j)(4) Trucks .178(p)(2) Refuse: Disposal .142(h) Receptacles .141(a)(4) Relief Devices: (see Safety Relief Devices) Remote Gas Pumping Systems .106(g)(3)(v) Residue Disposal: (see Waste Disposal) Resistance Welding Equipment .255(c) Capacitor Discharge Welding .255(b)(2) Disconnecting Means .306(d)(2) Foot Switches .255(b)(6) Grounding .255(b)(9) Guarding .255(a)(4), (b)(4) Installation .255(a)(1) Interlocks .255(b)(3) Safety Pins .255(b)(8) Shields .255(b)(5) Spot and Seam Welding .255(b) Stop Buttons .255(b)(7) Thermal Protection .255(a)(2) Resistors: Cranes .179(g)(4) Respirators: (see also Gas Mask Canisters) .134 Abrasive Blasting .94 (a)(1)(ii), (a)(5) Air Supply .94(a)(6), .134(d) Asbestos .1001(d)(1), (2) Cleaning .134(b)(5), (f)(3) Color Codes .134(g)(6) Employer Provided .134(a)(2) Fire brigades .156(f) Identification .134(g) Inspection .134(b)(7), (f) Labeling .134(g) Maintenance .134(f) Minimum Acceptable Program .134(b) Positive-pressure .156(f)(2) Pulp, and Paper Mills .261(g)(2), (6), (10), (15)(ii) Repairs .134(f)(4) Selection .134(c) Storage .134(b)(6), (f)(5) Training .134(b)(3) Use .134(e) Welding .252(c)(4)(ii), (iii); (5)(ii); (7)(ii); (8); (9); (10) Respiratory Protection: (see also Respirators) .134 Air Quality .94(a)(6), .134(d) Air Supply .94(a)(6), .134(d) Fire brigades .156(f) Fit testing .1001(g)(4), App. C, .1025(f)(3), App. D, .1028(g)(5), App. E, .1048(g)(3)(ii), App. E Gas Mask Canister Identification .134(g) Minimum Acceptable Program .134(b) Permissible Practices .134(a)(1) Respirators .134(a)(2), (b), (c), (e) Use .134(e)(5) Right to know .1200 Rim wheels, multi-piece .177 Ring Test .215(d)(1) Ripsaws .213(c), .214(d) Risers, Open .24(j) Rodent Control .141(a)(5) Labor Camps .142(j) Rolling Scaffolds: (see Work Platforms, Mobile). Roofing Brackets .28(s) Catch Platforms .28(s)(3) Construction .28(s)(1) Supports .28(s)(2) Rope Inspections: Cranes .179(m), .180(g) Derricks .181(g) Ropes: Cranes .179(m), .180(g) Hoists .179(h)(2) Inspections .179(m), .180(g) Running .179(m)(1) Derricks .181(g) Idle Ropes .181(g)(3) Limited Travel .181(g)(2) Nonrotating Ropes .181(g)(4) Running .181(g)(1) Powered Platforms .66(f)(7), (g)(5), (h)(3), (4) Rotary Lawn Mowers .243(e)(1), (4) Rotating Work Platforms: (see also Vehicle-Mounted WorkPlatforms) .67 Rubber Industry: (see also Mills, Rubber and Plastics Industry) Auxiliary Equipment .216(a)(3), (b)(3) Effective Dates .216(a)(1), (2); .220 Installations: Existing .216(a)(2) New .216(a)(1) Mills and Calenders .216 Standards Sources .221 Rubber Protective Equipment .221 Rung Ladders, Portable .25(c)(3) Running Ropes: Cranes .179(m)(1), .180(g)(1) Derricks .181(g)(1) Runway Conductors: Cranes .179(g)(6) Runway Protection .23(c) Safety Belts: (see also Lifelines) Powered Platforms .66(f)(5(ii), (L), (M), (iii)(B), (j), App. C Pulp, Paper, and Paperboard Mills .261(g)(4), (15) Scaffolding .28(j)(4), (n)(8), (s)(3), (t)(2),(u)(6) Welding .252(b)(4)(iv) Safety Color Codes: Effective Dates .149 Standards Sources .147 Safety Devices: Ladders .27(d)(5) Safety Guard Design, Abrasive Wheel Machinery .215(a)(2), (b)(10)-(12) Safety Instruction Signs .145(c)(3), (d)(6) Safety Relief Devices: Bulk Oxygen Systems .104(b)(6), (7)(ii) Flammable Liquids .107(e)(8) Gaseous Hydrogen Systems .103(b)(1)(ii) Liquefied Hydrogen Systems .103(c)(1)(iv) Liquefied Petroleum Gases .110(b)(10), (c)(7), (d)(4), (e)(7), (g)(7), (h)(4) Non-DOT Containers .110(d)(4) Spraying .107(e)(8) Safety-Toe Footwear: (see Foot Protection) Sanding Machines .213(p), .243(a)(3) Sanitation .141 Application .141(a)(1) Change Rooms .141(e) Effective Dates .149 Food Handling .141(h) Hazardous Waste Operations .120(b)(13), (n) Housekeeping .141(a)(3) Insect Control .141(a)(5) Lunchrooms .141(g) Rodent Control .141(a)(5) Sawmills .265(h) Standards Sources .150 Toilet Facilities .141(c) Vermin Control .141(a)(5) Washing Facilities .141(d) Waste Disposal .141(a)(4) Water Supply .141(b) Sawmills: Bins, Bunkers, Hoppers, and Fuel Houses .265(c)(23) Lighting .265(c)(23)(iii) Loading Bins .265(c)(23)(ii) Blower Systems .265(c)(20) Building Facilities .265(c) Docks .265(c)(4) Emergency Exits .265(c)(6) Fire Escapes .265(c)(6) Floors .265(c)(3) Lighting .265(c)(9) Platforms .265(c)(4) Stairways .265(c)(5) Handrails .265(c)(5)(ii) Lighting .265(c)(5)(iii) Tanks .265(c)(8) Vats .265(c)(8) Walkways .265(c)(4) Work Areas .265(c)(2) Burners .265(c)(29) Chippers .265(c)(21) Conveyors .265(c)(18) Definitions .265(b) Effective Dates .265(j) Exhaust Systems .265(c)(20) Gas Piping and Appliances .265(c)(15) General Requirements .265(a) Hydraulic Systems .265(c)(13) Kilns, Dry .265(f) Log Breakdown .265(e) Log Handling, Sorting, and Storage .265(d) Barking Devices .265(d)(4) Log Decks .265(d)(3) Storage Areas .265(d)(2) Unloading .265(d)(1) Unloading Areas .265(d)(2) Lumber: Loading .265(c)(28) Piling .265(c)(27) Storage .265(c)(27) Marking Physical Hazards .265(c)(11) Refuse Removal .265(c)(20)(vi) Ropes, Cables, Slings, and Chains .265(c)(24) Stackers and Unstackers .265(c)(26) Standards Sources .265(a)(2), (j); .268 Traffic Control .265(c)(31) Tramways .265(c)(19) Trestles .265(c)(19) Vehicles .265(c)(30) Saws: Band .213(i) Band Resaws .213(i) Circular .213(f); .243(a)(1) Circular Resaws .213(e) Cracked .243(a)(4) Cylindrical Saws .214(c) Drag .213(r) Forging Machines .218(j)(2) Heading Bolt .214(a), (c) Inspection .213(s) Radial .213(h) Ripsaws .213(c) Swing Cutoff .213(g) Table .213(d) Scaffolding: (see also Scaffolds) Safety Requirements .28 Scaffolds: (see also Ladder Stands Listings by Names of Scaffolds) Boatswain's Chair .28(j) Bricklayers’ Square .28(l) Carpenters’ Bracket .28(k) Chicken Ladders .28(t) Coupler, Mobile .29(d) Crawling Boards .28(t) Decorators’ .28(o) Float .28(u) Horse .28(m) Interior Hung .28(p) Ladder-Jack .28(q) Masons’ Adjustable Multiple-Point Suspension .28(f) Needle Beam .28(n) Outrigger .28(e) Plasterers’ .28(o) Powered platforms .66 Roofing Brackets .28(s) Ship .28(u) Single-Point Adjustable Suspension .28(i) Stone Setters’ Adjustable Multiple Point Suspension .28(h) Suspension .28(f), (g), (h), (i) Swinging .28(g) Tube and Coupler .28(c) Tube and Coupler, Mobile .29(d) Tubular Welded Frame .28(d), .29(b) Tubular Welded Sectional Folding .29(c) Two-Point Suspension .28(g) Window-Jack .28(r) Wood Pole .28(b) Scaffolds, Manual Mobile: (see also Work Platforms, Mobile Scaffolds) .29 Scientific Diving (see Diving, Scientific Semigantry Cranes: (see Gantry Cranes) Separation Walls: (see also Distances From Hazards) Ammonium Nitrate .109(i)(5) Service Stations: Flammable and Combustible Liquids .106(g) Dispensing Systems .106(g)(3) Drainage .106(g)(7) Electrical Equipment .106(g)(5) Fire Protection .106(g)(9) Handling .106(g)(1) Heating Equipment .106(g)(6) Ignition Sources .106(g)(8) Marine Stations .106(g)(4) Multi-piece rim wheels, servicing .177 Private Stations .106(g)(2) Storage .106(g)(1) Waste Disposal .106(g)(7) Liquefied Petroleum Gases .110(h) Containers .110(h)(2) Accessories .110(h)(3) Capacity .110(h)(5) Installation .110(h)(6) Protecting Fittings .110(h)(7), (9) Valves .110(h)(3) Dispensing Devices .110(h)(11) Electrical Systems .110(h)(13) Fire Protection .110(h)(14) Fittings .110(h)(7) Piping .110(h)(7) Pumps .110(h)(10) Safety Relief Valves .110(h)(4) Truck Unloading .110(h)(8) Valves .110(h)(7) Setscrews .219(h) Sewage Disposal .142(e) Shafting Guarding: Horizontal .219(c)(2) Inclined .219(c)(3) Vertical .219(c)(3) Sheaves: Crane Hoists .179(h)(1) Shelters, Labor Camps: (see also Facilities, Labor Camps) .142(b) Ship Scaffolds: (see also Float Scaffolds) .28(u) Side-Rolling Ladders .25(c)(5) Signs and Tags: (see also Markings) Accident Prevention .145 Classification .145(c) Definitions .145(b) Use Classification .145(c) Biological Hazards .145(e)(4), (f)(8) Caution .1001(g), .145(c)(2), (d)(4), (f)(6) Colors .145(d) Danger .145(c)(1), (d)(2), (e)(3), (f)(5) Design .145(d), (f)(4) Effective Dates .149 Egress Means .37(q) Exits .37(q) Gas Mask Canisters .134(g) Hazardous materials, retention of DOT markings .1201 Powered Platforms .66(f)(7)(vi) Pulp and Paper Mills .261(c)(9), (16) Radiation Warning .97(a)(3) Respirators .134(g) Safety Instruction .145(c)(3), (d)(6) Slow-Moving Vehicles .145(d)(10) Specifications .93a(g)(ii), .145 Standards Sources .150 Wordings .145(e) Single-Point Adjustable Suspension Scaffolds .28(i) Single-Rung Ladders .25(c)(3)(ii) Mason's .25(c)(4)(iii) Skylight Floor Openings .23(a)(4) Sleeping Facilities, temporary .120(n)(5) Sleeves, Rubber Insulating .137 Slings .184 Slurries .109(h) Small Arms Ammunition .109(j) Primers .109(j)(4) Smokeless Propellants .109(j)(3) Storage .109(j) Smokeless Propellants .109(j)(3) Smoking: Dual Component Coatings .107(m)(2) Explosives .109(e)(1) Flammable Liquids .106(d)(7)(iii) Powder Coatings .107(l)(4)(iii) Spraying .107(g)(7), (l)(4)(iii), (m)(2) Snagging Machines .215(b)(7) Sources of Standards: (see Standards Sources) Special Industries: Bakeries .263 Cooperage .214 Forging .218 Hazardous Waste Operations .120 Laundries .264 Paper and Paperboard Mills .261 Plastics Industry .216 Pulp Mills .261 Pulpwood Logging .266 Rubber Industry .216 Sawmills .265 Standards Sources .268 Textiles .219(a)(3), .262 Woodworking .213 Spill Containment .106(d)(6)(iii) Spot and Seam Welding Machines .255(b) Spray Booths .107(b) Spray Finishing .107 Air Flow .94(c)(6) Application .107(n) Automobile Undercoatings .107(k) Clean Air .94(c)(7) Combustible Liquids Storage .107(e) Curing Apparatus .107(j) Drying Apparatus .107(j) Dual Component Coatings .107(m) Electrical Systems .107(c) Electrostatic Apparatus .107(h), (1) Fire Protection .107(f) Flammable Liquids Storage .107(e) Fusion Apparatus .107(j) Ignition Sources .107(c) Location .94(c)(2) Maintenance .106(g) Make-Up Air .94(c)(7) Organic Peroxide Coatings .107(m) Powder Coatings .107(l) Spray Booths .94(c)(3), .107(b) Spray Rooms .94(c)(4) Undercoatings .107(k) Velocity .94(c)(6) Ventilation .94(c)(5), .107(d) Spray Liquid Heaters .107(e)(7) Spraying Operations .107(g) Sprinkler Systems: Egress .37(m) Sprinkler Systems, Automatic .159 Acceptance tests .159(c)(3) Design .159(c)(1) Drainage .159(c)(7) Exemptions .159(a) Hose Connections .159(c)(5) Hydraulically Designed .159(c)(11) Maintenance .159(c)(2) Protection of Piping .159(c)(6) Sprinkler Alarms .159(c)(9) Sprinkler Spacing .159(c)(10) Water supply .159(c)(4) Sprinklers Dip Tanks .125(f) Egress Means .37(m) Sprockets .219(f) Stability Margin: Crane Loads .180(c)(1)(i)-(iv) Stainless Steel Cutting .252(c)(12) Stairs, Fixed Industrial .24 Handrails .24(h) Length of Stairways .24(g) Railings .24(h) Rise Angle .24(e) Strength .24(c) Treads .24(f) Vertical Clearance .24(i) Width .24(d) Standards Sources: Accident Prevention Signs and Tags .150 Acetylene .115 Air Contaminants .99 Air Receivers .169(a)(2), .170 Anhydrous Ammonia .115 Asbestos .99 Blasting Agents .115 Color Codes .150 Combustible Gases .115 Combustible Liquids .115 Compressed Gas Equipment .170 Compressed Gases .115 Cranes .189 Derricks .189 Dip Tanks .115 Egress Means .39 Environmental Controls .99, .150 Explosives .115 First Aid .153 Flammable Liquids .115 Guarding Machinery .221 Hand-Held Equipment .246 Hazardous Materials .115 Hydrogen .115 Indoor Storage .189 Ionizing Radiation .99 Labor Camps .150 Ladders .31 Life Safety Code .39 Liquefied Petroleum Gases .115 Machinery Guarding .221 Manlifts .69 Materials Handling .189 Medical .153 Medical Services .153 Nitrous Oxide .115 Noise Exposure .99 Nonionizing Radiation .99 Nonwater Disposal Systems .150 Occupational Health .99 Oxygen .115 Physical Hazards Markings .150 Platforms, Powered .69 Powered Industrial Trucks .189 Powered Platforms .69 Powered Tools, Hand and Portable .246 Railings .31 Safety Color Codes .150 Sanitation .150 Signs and Tags .150 Special Industries .274 Spray Finishing .115 Tanks, Cargo and Portable .170 Toeboards .31 Toxic Substances .1499 Vehicle Mounted Work Platforms .69 Ventilation .99 Walking-Working Surfaces .31 Wall Openings .31 Standpipe and Hose Systems .158 Equipment .158(c) Hose .158(c)(3) Hose Outlets and Connections .158(c)(2) Nozzles .158(c)(4) Reels and Equipment .158(c)(1) Exceptions .158(a)(2) Protection .158(b) Scope and Application .158(a)(1) Tests and Maintenance .158(e) Acceptance Tests .158(e)(1) Maintenance .158(e)(2) Water Supply .158(d) Stands, Ladder: (see also Scaffolds; Work Platforms, Mobile) Stationary Derricks: (see also Derricks) .181 Static Sparks .219(p)(2)(ii) Steps: (see Stairs) Stepladders: Portable Metal .26(a)(3) Stepladders, Portable .25(c)(2) Sticking Machines .213(n) Stiffleg Derricks: (see also Derricks) .181 Stone Setters’ Adjustable Multiple-Point: Suspension Scaffolds .28(h) Stopping Limits, Mills and Calenders .216(f) (1)-(3) Stops: (see also Safety Devices) Manlifts .68(c)(5), (6) Storage: (see also Materials Storage: Storage Areas; Tank Storage: Tank Storage, Portable) Ammonium Nitrate .109(i) Anhydrous Ammonia .111 Blasting Agents .109(g)(5) Buildings .106(d)(5) Mercantile Occupancies .106(d)(5)(iv) Office Occupancies .106(d)(5)(iii) Warehouses .106(d)(5)(v) Clothing .107(g)(4) Compressed Gases .101(b), .167-.168 Containers, Bulk Oxygen .104(b)(4), (6) Explosives .109(c), (e)(2), (b)(1) Flammable and Combustible Liquids .106(b), (d) Inside Storage Rooms .106(d)(4) Storage Inside Buildings .106(d)(5) Storage Outside Buildings .106(d)(6) Indoor Rooms .106(d)(5) Liquefied Petroleum Gases .110 Logs .265(d) Lumber .265(c)(27) Pulp and Paper Mills .261(c), (d) Pulpwood Logging .266(e)(12) Respirators .134(f)(5) Service Stations .106(g)(1) Storage Areas: Aisles and Passageways .176(a) Bridge Plates .178(j), (k)(4) Clearance Signs .176(e) Clearances .176(a) Dockboards .178(j), (k)(4) Drainage .176(d) Housekeeping .176(c) Lighting .178(h) Noxious Gases .178(i) Railroad Cars .178(k)(2)-(4) Securing .176(b) Trucks, Highway .178(k)(1), (3); (m) Storage Batteries: (see Battery Changing and Charging) Storage Bridge Cranes: (see Gantry Cranes) Storage, Tanks: (see Tank Storage; Tank Storage, Portable) Straight Ladders, Portable Metal .26(a)(2) Surface Grinders .215(b)(5) Swing Frame Grinders .215(b)(6) Swing-Head Lathes .213(o) Swinging Locomotive Cranes .180(i)(6) Swinging Scaffolds: (see also Two-Point Suspension Scaffolds) .28(g) Switches: Electric .305(c) Cranes .179(g)(5) Trip and Emergency .216(e) Table Saws .213(d) Tags: (see Signs and Tags) Tanks: (see also Cargo Tanks—Portable Tanks) Hardening .126(a)(1)(i),(ii) Tempering .126(a) Tanks, Dip: (see also Dip Tanks) .123-.126 Tanks, Storage: Flammable and Combustible Liquids .106(b) Atmospheric Tanks .106(b)(1)(iii) Construction .106(b)(1) Corrosion .106(b)(1)(vi) Diking .106(b)(2)(vii) Ignition Sources .106(b)(6) Installation: Above Ground, Outside .106(b)(2) Inside Buildings .106(b)(4) Underground .106(b)(3) Low Pressure Tanks .106(b)(1)(iv) Materials .106(b)(1)(i) Pressure Vessels .106(b)(1)(v) Supports .106(b)(5) Testing .106(b)(7) Venting .106(b)(2)(iv), (v), (vi), (3)(iv), (4)(ii), (iii) Tanks, Storage, Portable: Flammable and Combustible Liquids .106(d) Application .106(d)(1)(i) Capacity .106(d)(2) Design .106(d)(2) Exceptions .106(d)(1), (2) Fire Protection .106(d)(7) Indoor Storage .106(d)(4), (5) Outdoor Storage .106(d)(6) Storage Cabinets .106(d)(3) Temporary Floor Openings .23(a)(7) Temporary Labor Camps: (see also Labor Camps, Temporary) .142 Tempering Tanks .126(a) Tenoning Machines .213(k) Telecommunications .268 Testing: Bulk Oxygen .104(b)(8)(v) Cranes .179(k), .180(e) Derricks .18(e) Fire Extinguishers: .157(e) Gaseous Hydrogen Systems .103(b)(1)(vi) Liquefied Hydrogen Systems .103(c)(1)(vii) Piping .106(c)(7) Powered Platforms .66(g) Radiation Alarm .96(f)(3) Sprinkler Systems .159(c)(3) Standpipe and hose systems .158(e) Storage Tanks .106(b)(7) Textiles: Acid Carboys .262(nn) Bleaching .262(p) Calenders .262(ee) Caustics .262(oo) Color-Mixing Room .262(kk) Cotton Cards .262(e) Cotton Combers .262(j) Drawing Frames .262(j) Drying Cans .262(w) Drying Tumblers .262(cc) Dyeing Jigs .262(u) Dye Vats .262(mm) Extractors .262(y) First Aid .262(pp) Flat Work Ironers .262(x) Folders, Overhead .262(jj) Garnet Machines .262(f) Gill Boxes .262(k) Hand Boiling Machines .262(hh) Kiers .262(q) Lappers .262(m) Looms .262(n) Mercerizing Ranges .262(s) Nip Guards .262(dd)(1), (v), (z) Openers .262(d) Padders .262(v) Personal Protective Equipment .262(qq) Pickers .262(d) Power Transmission .219(a)(3) Printing Machines .262(dd) Rings Frames .262(j) Roll Bench .262(ii) Rope Washers .262(bb) Sanforizing and Palmer Machines .262(aa) Shearing Machines .262(o) Slashers .262(h) Slubbers .262(j) Spinning Mules .262(g) Standards Sources .262(a)(2), .265(j) Staple Cullers .262(ff) Tanks, Open .262(ll) Tenter Frames .262(t) Tumblers .262(cc) Warpers .262(i) Worsted Drawing .262(l) Toe Protection: (see Foot Protection) Toeboards: Cranes .179(d)(3) Definition .21(a)(9) Power Transmission Apparatus .219(o)(5) Powered Platforms .66(f)(5)(i)(G) Walking-Working Surfaces .23(a)(2), (3)(ii), (e) Toilet Facilities: (see also Toilets) .141(c) Construction .141(c)(2), (3) Hazardous Waste .120(n)(3) Labor Camps .142(d) Lavatories .141(d)(2) Minimum Numbers .141(c)(1), (d)(2) Towels .141(d)(3)(v) Washing Facilities .141(e)(1)(vii), (d) Tongs, Upsetters .218(h)(4) Tooling .217(d)(5) Torch Valves, Welding .252(a)(4)(ii) Towels .141(d)(3)(v) Towers, Scaffolds: (see Ladder Stands and Scaffolds; Scaffolds; Work Platforms, Mobile) .29 Tractors: (see also Powered Industrial Trucks) .178 Trailers .111(d)(7) Training Personnel .96(i), .217(e)(3) Bloodborne pathogens, exposure to .1030(e)(5), (g)(2) Electrical safety-related work practices .332 Fire brigades .156 Fire extinguishers .157(g) Hazardous chemicals .1200 Hazardous chemicals, highly, process safety management .119(g) Hazardous waste operations .120(e), (p)(7), (q)(6) Respirators .134(b)(3), (e)(5) Telecommunications .268(c) Truck Operators .178(l) Working platform operations .66(i)(1) Transmission Pipeline Welding .252(d)(1) Construction Standards .252(d)(1)(v) Electric Shock .252(d)(1)(iii) Field Shop Operations .252(d)(1)(ii) Flammable Substances .252(d)(1)(vi) Pressure Testing .252(d)(1)(iv) X-ray Inspection .252(d)(1)(vii) Transportation: Blasting Agents .109(g)(6) Explosives .109(d) Fire Extinguishers .109(d)(2)(iii) Markings .109(d)(2)(ii) Vehicles .109(d)(2), (3) Trapdoors .23(a)(5) Traps, Air Receivers .169(b)(2) Treads, Stairs .24(f)(k) Treadles .217(b)(4) Trestle Ladders, Portable: Metal .26(a)(4) Wood .25(c)(3)(v) Trimming Presses .218(g) Trips, Two-Hand .217(b)(6) Trolley Bumpers, Cranes .179(e)(3) Trolley Ladders, Portable .25(c)(5) Trolley Stops, Cranes .179(e)(1) Truck Cranes: (see Crawler, Locomotive and Truck Cranes) .180 Trucks .178(k), (m) Forklift .261(c)(1) Hand .261(m)(1) Highway .178(k), (m) Powered Industrial .178 Trucks, Powered Industrial: (see also Powered IndustrialTrucks) .178 Tube and Coupler Scaffolds .28(c) Tube and Coupler Scaffolds, Mobile .29(d) Tubing: (see Piping, Fittings, and Tubing) Tubular Welded Frame Scaffolds .28(d) Tubular Welded Frame Scaffolds, Mobile .29(b) Tubular Welded Sectional Folding Scaffolds .29(c) Turning Machines .213(o) Two-Point Suspension Scaffolds .28(g) Two-Section Rung Ladders .25(c)(3)(iii) U-Guards .219(m)(3) Underground Storage Tanks, Flammable and CombustibleLiquids .106(b)(3) Location .106(b)(3)(i) Depth and Cover .106(b)(3)(ii) Corrosion Protection .106(b)(3)(iii) Vents .106(b)(3)(iv) Unit Physical Operations .106(e)(3)(v) Upsetters .218(h) Dies Changing .218(h)(5) Lockouts .218(h)(2) Manual Controls .218(h)(3) Supporting Foundations .218(h)(1) Tongs .218(h)(4) Valves: (see also Piping, Valves, and Fittings) Air Receivers .169(b)(3) Liquefied Petroleum Gases .110(b)(7) Non-DOT Containers .110(d)(3) Vaporizers: Liquefied Petroleum Gases .110(b)(11) Liquid Hydrogen .103(c)(1)(viii) Liquid Oxygen .104(b)(7) Vehicles, slow-moving, signs .145(d)(10) Veneer Machinery .30(c) Cutters .213(q), (s)(13) Ventilation .94, .107(d) Abrasive Blasting .94(a) Asbestos .1001(c)(1)(ii) Bulk Oxygen Systems .104(b)(3)(xii) Bulk Plants .106(f)(2)(iii) Confined Spaces .255(e)(4)(ii), (f) Dip Tanks .124(b), .125(d)(2) Effective Dates .98 Electrostatic Spraying .107(i), .107(r)(9) Grinding, Polishing, and Buffing .94(b) Inside Storage Rooms .106(d)(4)(iv) Laundries .262(c)(4)(ii), (d)(1)(ii) Powder Coatings .107(1)(2) Processing Buildings .106(h)(3)(iii) Sawmills .265(c)(7) Spray Finishing .94(c)(5) Spraying Operations .94(c), .107(d) Exhaust Duct System .107(d)(3), (7) Fan-Rotating Element .107(d)(4) Independent Exhaust .107(d)(3) Room Intakes .107(d)(11) Standards Sources .99 Venting, Tanks: Aboveground .106(b)(2)(iv)-(vi) Inside .106(b)(4)(ii) Portable .106(d)(2)(ii) Underground .106(b)(3)(iv) Vents: (see Venting) Vermin Control .141(a)(5) Vinyl Chloride .1017 Emergency situations .1017(i) Hazardous operations .1017(h) Medical surveillance .1017(k) Methods of compliance .1017(f) Monitoring .1017(d) Permissible exposure limit .1017(c) Regulated area .1017(e) Respiratory protection .1017(g) Signs and labels .1017(l) Training .1017(j) Walking-Working Surfaces: Aisles .22(b) Covers .22(c) Definitions .21 Fixed Industrial Stairs .24 Floor Loading .22(d) Floor Openings Guard .23 General Requirements .22 Guardrails .22(c) Housekeeping .22(a) Ladders: Fixed .27 Portable: Metal .26 Wood .25 Stands .29 Passageways .22(b) Scaffolding Safety .28 Scaffolds (Towers) .29 Stairs, Fixed Industrial .24 Standards Sources .31 Wall Openings Guarding .23 Working Surfaces .30 Wall Cranes: (see Gantry Cranes) Wall Openings (Holes) .23(b) Warehouses: Ammonium Nitrate .109(i)(4) Flammable Liquids .106(d)(5)(v) Warning Devices and Signs: (see also Signs and Tags) Bloodborne pathogens .1030(g)(1) Cranes .179(i) Ionizing Radiation .96(f) Manlifts .68(c)(7) Nonionizing Radiation .97(a)(3) Washing Facilities .141(d), .142(f), .120(n)(6) Waste Disposal .141(a)(4) Asbestos .1001(h)(2) Bulk Plants .106(f)(7) Containers .141(g)(3) Dip Tanks .125(e)(4)(ii),(iii) Ionizing Radiation .96(k) Labor Camps .142(e), (h) Processing Plants .106(h)(8)(iii) Radiation .96(k) Service Stations .106(g)(7) Spraying .107(g)(3) Water Gels .109(h) Water Spray Extinguishing Systems, Fixed .163 Water Supply: Hazardous waste operations .120(n) Labor Camps .142(c) Nonpotable Water .141(b)(2) Potable Water .141(b)(1) Sprinkler Systems .159(c)(4) Standpipe and Hose Systems .158(d) Weather Protection Manlifts .68(b)(15) Welding: (see also Acetylene Generators; Arc Welding; Flash Welding Equipment; Resistance Welding Equipment; Welding Machines, Portable) .251-.257 Beryllium .252(c)(8) Cadmium .252(c)(1)(v), (9) Chemicals, highly hazardous, process safety management; hot-work permits .119(k) Cleaning Compounds .252(c)(11) Concentrations, Maximum Allowable .252(c)(1)(iii) Containers .252(a)(3) Contamination .252(c)(1)(i) Definitions .251 Exhaust Hoods .252(c)(3) Fire Protection .252(a)(2)(i), (ii), (xv) First Aid Equipment .252(c)(13) Fluorine Compounds .252(c)(1)(v), (5) Labels .252(c)(1)(iv) Ladders, Fixed .27(b)(6) Lead .252(c)(7) Liquefied Petroleum Gases .110(b)(4) Mercury .252(c)(10) Piping Systems, Mechanical .252(d)(2) Personnel Protection .252(b) Precautions .252(a)(2), .255(e) Prohibited Areas .252(a)(2)(vi) Screens .252(c)(1)(ii) Spot and Seam .255(b) Stainless Steels .252(c)(12) Supervisory Responsibility .252(a)(2)(xiv) Transmission Pipelines .252(d)(1) Ventilation .252(c)(1)(ii), (c)(2)-(4) Zinc .252(c)(6) Welding Machines, Portable .255(c) Clevis .255(c)(3) Counterbalance .255(c)(1) Grounding .255(c)(6) Holder, Movable .255(c)(5) Safety Chains .255(c)(2) Switch Guards .255(c)(4) Wharves: Bulk Plants .106(f)(4) Chemical Plants .106(i)(2) Distilleries .106(i)(2) Explosives .109(f) Marine Service Stations .106(g)(4) Refineries .106(i)(2) Wheels, Multi-Piece Rim: Servicing .177 Winch Heads, Derricks .181(i)(5) Wind Indicators .179(b)(4) Window-Jack Scaffolds .28(r) Guardrails .28(r)(3) Use .28(r)(1), (2) Wood Heel Turning Machines .213(o) Wood Ladders, Portable: (see also Ladders, Portable Wood) .25 Wood Pole Scaffolds .28(b) Wood Shapers .213(m) Wooden Guards .219(o)(2) Woodworking Machinery .213 Band Saws and Resaws .213(i) Boring Machines .213(l) Circular Resaws .213(e) Construction .213(a) Controls .213(b) Crosscut Table Saws .213(d) Definitions .211(a) Drag Saws .213(r) Effective Dates .220 Glue Spreaders, Roll-Type .213(r) Hand-Fed Crosscut Table Saws .213(d) Hand-Fed Ripsaws .213(c) Inspection .213(s) Jointers .213(j) Maintenance .213(s) Matching Machines .213(n) Molding Machines .213(n) Mortising Machines .213(l) Planing Machines .213(n) Profile Lathes .213(o) Radial Saws .213(h) Ripsaws .213(c) Sanding Machines .213(p) Self-Fed Circular Saws .213(f) Standards Sources .221 Sticking .213(n) Swing Cutoff Saws .213(g) Swing Head Lathes .213(o) Table Saws .213(d) Tenoning Machines .213(k) Turning Machines .213(o) Veneer Cutters .213(q) Wood Heel Turning Machines .213(o) Wood Shapers .213(m) Woodworking Tools, Portable Powered .243(a) Belt Sanding Machines .243(a)(3) Circular Saws .243(a)(1) Cracked Saws .243(a)(4) Dead-Man Controls .243(a)(2) Grounding .243(a)(5) Sanding Machines .243(a)(3) Work Platforms .66, .67 Elevating and Rotating .67 Powered Platforms .66 Vehicle-Mounted .67 Application .67(b)(1) Design .67(b)(2) Work Platforms, Mobile: (see also Scaffolds) .29(e) Working Surfaces: (see also Walking-Working Surfaces) .30 X-ray Inspections, Mechanical Piping Systems .252(d)(2)(ii) Zinc .252(c)(6) Confined Spaces .252(c)(6)(i) Indoors .252(c)(6)(ii)