Code of Federal Regulations (Last Updated: October 10, 2024) |
Title 7 - Agriculture |
Subtitle B - Regulations of the Department of Agriculture |
Chapter I - Agricultural Marketing Service (Standards, Inspections, Marketing Practices), Department of Agriculture |
SubChapter C - Regulations and Standards Under the Agricultural Marketing Act of 1946 and the Egg Products Inspection Act |
Part 58 - Grading and Inspection, General Specifications for Approved Plants and Standards for Grades of Dairy Products 1 |
Subpart B - General Specifications for Dairy Plants Approved for USDA Inspection and Grading Service |
Operations and Operating Procedures |
§ 58.336 - Frequency of sampling for quality control of cream, butter and related products.
-
§ 58.336 Frequency of sampling for quality control of cream, butter and related products.
(a) Microbiological. Samples shall be taken from churnings or batches and should be taken as often as is necessary to insure microbiological control.
(b) Composition. Sampling and testing for product composition shall be made on churns or batches as often as is necessary to insure adequate composition control. For in-plant control, the Kohman or modified Kohman test may be used.
(c) Chemical -
(1) Acid degree value. This test should be made on churnings or batches from samples taken from the cream as often as is necessary to aid in the control of lipase activity.
(2) Free fatty acid. This test should be made on churnings or batches from samples taken from the butter as often as is necessary to aid in the control of lipase activity.
(d) Other analysis. Other chemical analysis or physical measurements shall be performed as often as is necessary to insure meeting grade standards and contract specifications.
(e) Weight or volume control. Representative samples of the packaged product should be checked using procedures prescribed by the Administrator during the packaging operation to assure compliance with the stated net weight or volume on the container.
(f) Keeping quality and stability. Samples from churnings shall be subjected to a seven day keeping quality test at a temperature of 72 °F. to establish and maintain a satisfactory keeping quality history. Optionally 98 °F. for 48 hours may be used, however, in case of a dispute, the results of the seven days at 72 °F. will prevail.