Code of Federal Regulations (Last Updated: November 8, 2024) |
Title 7 - Agriculture |
Subtitle B - Regulations of the Department of Agriculture |
Chapter I - Agricultural Marketing Service (Standards, Inspections, Marketing Practices), Department of Agriculture |
SubChapter M - Organic Foods Production Act Provisions |
Part 205 - National Organic Program |
Subpart E - Certification |
§ 205.403 - On-site inspections.
-
§ 205.403 On-site inspections.
(a) On-site inspections.
(1) A certifying agent must conduct an initial on-site inspection of each production unit, facility, and site that produces or handles organic products and that is included in an operation for which certification is requested. An on-site inspection shall be conducted annually thereafter for each certified operation that produces or handles organic products for the purpose of determining whether to approve the request for certification or whether the certification of the operation should continue.
(2) Inspections of a producer group operation must:
(i) Assess the internal control system's compliance, or ability to comply, with the requirements of § 205.400(g)(8). This must include review of the internal inspections conducted by the internal control system.
(ii) Conduct witness audits of internal control system inspectors performing inspections of the producer group operation.
(iii) Individually inspect at least 1.4 times the square root or 2% of the total number of producer group members, whichever is higher. All producer group members determined to be high risk by the certifying agent must be inspected. At least one producer group member in each producer group production unit must be inspected.
(iv) Inspect each handling facility.
(3)
(i) A certifying agent may conduct additional on-site inspections of applicants for certification and certified operations to determine compliance with the Act and the regulations in this part.
(ii) The Administrator or State organic program's governing State official may require that additional inspections be performed by the certifying agent for the purpose of determining compliance with the Act and the regulations in this part.
(iii) Additional inspections may be announced or unannounced at the discretion of the certifying agent or as required by the Administrator or State organic program's governing State official.
(b) Unannounced inspections.
(1) A certifying agent must, on an annual basis, conduct unannounced inspections of a minimum of five percent of the operations it certifies, rounded up to the nearest whole number.
(2) Certifying agents must be able to conduct unannounced inspections of any operation they certify and must not accept applications or continue certification with operations located in areas where they are unable to conduct unannounced inspections.
(c) Scheduling.
(1) The initial on-site inspection must be conducted within a reasonable time following a determination that the applicant appears to comply or may be able to comply with the requirements of subpart C of this part: Except, That, the initial inspection may be delayed for up to 6 months to comply with the requirement that the inspection be conducted when the land, facilities, and activities that demonstrate compliance or capacity to comply can be observed.
(2) All on-site inspections must be conducted when an authorized representative of the operation who is knowledgeable about the operation is present and at a time when land, facilities, and activities that demonstrate the operation's compliance with or capability to comply with the applicable provisions of subpart C of this part can be observed, except that this requirement does not apply to unannounced on-site inspections.
c(
200d) Verification of information. The on-site inspection of an operation must verify:
(1) The operation's compliance or capability to comply with the Act and the regulations in this part;
(2) That the information, including the organic production or handling system plan, provided in accordance with §§ 205.401, 205.406, and 205.
201, accurately reflects the practices used or to be used by the applicant for certification or by the certified operation;
(3) That prohibited substances have not been and are not being applied to the operation through means which, at the discretion of the certifying agent, may include the collection and testing of soil; water; waste; seeds; plant tissue; and plant, animal, and processed products samples.
d)(
4) Mass-balances, in that quantities of organic product and ingredients produced or purchased account for organic product and ingredients used, stored, sold, or transported (that is, inputs account for outputs); and
(5) That organic products and ingredients are traceable by the operation from the time of purchase or acquisition through production to sale or transport; and that the certifying agent can verify compliance back to the last certified operation.
(e) Exit interview. The inspector must conduct an exit interview with an authorized representative of the operation who is knowledgeable about the inspected operation to confirm the accuracy and completeness of inspection observations and information gathered during the on-site inspection. The inspector must also address the need for any additional information as well as any issues of concern.
e(
f) Documents to the inspected operation.
(1) At the time of the inspection, the inspector shall provide the operation's authorized representative with a receipt for any samples taken by the inspector. There shall be no charge to the inspector for the samples taken.
(2) A copy of the on-site inspection report and any test results will be sent to the inspected operation by the certifying agent.
[65 FR 80637, Dec. 21, 2000, as amended at 88 FR 3623, Jan. 19, 2023]